Rubber & FoamSKU IP-IPSUC-9X19.5-BLACK
Silicone Round U Channel – 9mm x 19.5mm – Fits 5mm Edges – 25m Coil
A wide-slot silicone U channel with a solid, fully rounded base. The 5 mm slot runs 14 mm deep inside a 9 mm × 19.5 mm profile, so it slides over edges around 5 mm thick and covers a generous depth down each face. Under the slot sits 5.5 mm of solid 60 Shore A silicone, giving a soft, round bumper along the exposed edge. The silicone compound is stated as FDA compliant and WRAS approved and works from −50 °C to +180 °C. Supplied on a continuous 25 m coil in seven colours, held in UK stock.
At a glance
- Size: 9 mm wide × 19.5 mm high, 2 mm side walls
- Slot: 5 mm wide × 14 mm deep with a flat floor, for edges about 5 mm thick
- Base: 5.5 mm solid, full-round (R4.5) nose
- Material: silicone rubber, 60 Shore A, 1.15 g/cm³
- Temperature: −50 °C to +180 °C continuous
- Coil: 25 m continuous length, £27.00 per metre inc VAT
- Colours: black, blue, green, red, translucent, white, yellow
Technical drawing
![]()
Profile drawn to scale. Dimensions are nominal. Need a CAD-ready copy or a tolerance statement? Email sales@industrial-polymers.co.uk.
Specification
| Property | Value | Basis / test method |
|---|---|---|
| Profile type | Round-base U channel (full-round nose, flat slot floor) | Supplier drawing |
| Overall width | 9 mm | Supplier drawing (nominal) |
| Overall height | 19.5 mm | Supplier drawing (nominal) |
| Slot (grip) width | 5 mm | Supplier drawing (nominal) |
| Slot depth | 14 mm | Supplier drawing (nominal) |
| Side wall thickness | 2 mm | Supplier data (nominal) |
| Base thickness under slot | 5.5 mm | Calculated: 19.5 − 14 mm |
| Base radius | R4.5 (full round) | Calculated: half of 9 mm width |
| Edge thickness it suits | About 5 mm | Matched to the 5 mm slot; test-fit thinner or thicker edges |
| Coil length | 25 m continuous | Supplier |
| Approx. weight | ≈ 0.11 kg/m (≈ 2.8 kg per 25 m coil) | Calculated from section area × density |
| Material | Silicone rubber | Supplier |
| Hardness | 60 Shore A | Supplier data, Shore A durometer |
| Density | 1.15 g/cm³ | Supplier data |
| Tensile strength | 11 N/mm² (11 MPa) | Supplier data |
| Elongation at break | 550 % | Supplier data |
| Tear strength | 26 N/mm | Supplier data |
| Compression set | 31 % | Supplier data, 22 h at 175 °C |
| Rebound resilience | 59 % | Supplier data |
| Operating temperature | −50 °C to +180 °C (continuous) | Supplier data |
| Weathering | Good resistance to UV, ozone and weather | Supplier statement |
| Dimensional tolerance | Not stated by the supplier for this profile | Ask us if you need a tolerance figure |
Materials and compliance
- FDA: the silicone compound is stated by the manufacturer to be FDA compliant for food processing and handling use.
- WRAS: the material is stated to be WRAS approved for drinking water and public water supply applications.
We only list approvals that the manufacturer states in writing for this exact profile. If you need a certificate of conformity or approval documents for your file, ask before ordering and we will supply what is available.
How it fits
![]()
- Deburr the edge and wipe off oil and dust.
- Start at one end and press the channel on by hand, keeping the slot square to the edge.
- Work along the length without stretching the silicone, so it does not shrink back later.
- Cut to length with a sharp knife or snips for a clean, square end.
- For a permanent or watertight fit, run a bead of compatible silicone or polyurethane adhesive/sealant into the slot first.
Typical uses
- Edge guard on 5 mm sheet, glass, polycarbonate and board edges on machinery and guards
- Bumper edge on stainless food-machine guards, hoppers and inspection hatches
- Cushioning glass or panels held in frames
- Draught and dust seal around enclosures, hatches and doors
- Anti-rattle strip between clamped or mating panels
- Colour-coded edging for zones, hygiene areas or equipment ID
Data sheet
Download the Industrial Polymers technical data sheet (PDF)
Frequently asked questions
What thickness of edge does it fit?
The slot is 5 mm wide, so it is made for edges about 5 mm thick. Silicone stretches a little, so slightly thicker edges can be pushed in, and thinner edges will be loose unless you bond the channel. If your edge is 3 mm or less, choose a narrower slot from our U channel range.
How do I fit it?
Clean the edge, start at one end and press the channel on by hand, working along the length. No tools are needed. For a fit that will not move, add a bead of silicone or polyurethane adhesive/sealant inside the slot.
Can I cut and join it?
Yes. Cut it with a sharp knife, snips or a mitre block for corners. Butt joints can be sealed with a silicone adhesive. It bends round gentle curves; for tight corners, mitre-cut it or cut a notch from the inside of the bend.
What temperatures can it take?
The supplier rates it for continuous use from −50 °C to +180 °C, so it suits ovens, hot plant, freezers and outdoor work. It keeps its flexibility at low temperatures.
Is it suitable for food and drinking water?
The silicone compound is stated as FDA compliant and WRAS approved. Check that this meets your own application and audit requirements; we can supply the paperwork that is available on request.
Can I use it outdoors?
Yes. Silicone resists UV, ozone and weather well, so it will not crack or perish in sunlight like many general-purpose rubbers.
What length do I get and how much does it weigh?
Each order line is one continuous 25 m coil, with no joins. It weighs roughly 0.11 kg per metre, about 2.8 kg per coil.
Which colour should I choose?
All seven colours are the same profile and the same compound. Black is the general-purpose choice. White and translucent suit food and clean areas. Blue is often used in food plants because it shows up clearly. Red, green and yellow are useful for colour-coding or warnings.
Need help choosing a size, or a quantity price for several coils? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-IPSUC-9X19.5-BLACK |
|---|---|
| Weight | 6.39 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Round U Channel – 9mm x 19.5mm – Fits 5mm Edges – 25m Coil