Rubber & FoamSKU IP-SILSP-3-50DF-5-PLAINBAC
Silicone Sponge Rubber Strip – 3mm Thick – 25m Roll
Price shown updates with the option you pick.
This 3mm thick silicone sponge rubber strip is a medium-density, closed-cell extrusion designed for demanding sealing and gap-filling applications. Supplied as a 25m roll in widths from 5mm to 30mm, it features a smooth skin on all four sides to provide enhanced protection against dust and moisture ingress compared to standard sheet-cut strips.
At a glance
- 3mm thick medium-density silicone sponge gasket strip
- Extruded with a protective skin on all four sides
- Wide operating temperature range from -60°C to +230°C
- WRAS approved material for potable water up to 85°C
- Provides ingress protection up to IP65
- Available with plain or self-adhesive backing
Typical uses
- Sealing electrical enclosures and control panels
- Weatherproofing exterior light fittings
- Gasketing for handheld instruments
- Vibration dampening in industrial equipment
- General gap filling and edge trimming
Which one do I need?
| Choice | Best for |
|---|---|
| Plain Backing | Friction fitting into channels or applying your own specialist adhesive. |
| Self Adhesive | Fast, peel-and-stick application to clean, flat surfaces. |
| 3mm thick (this strip) | Small gaps and thin flanges such as enclosure doors and light fittings; choose a thicker strip where the gap is wider than about 2mm when closed. |
Technical drawing
Specification
| Material | Silicone sponge (closed-cell) |
| Colour | White |
| Thickness | 3mm |
| Widths | 5mm, 10mm, 15mm, 20mm, 25mm, 30mm |
| Unit of sale | One 25m roll |
| Density | 250 kg/m³ |
| Hardness | 47° (Shore OO) / 5° (Shore A) |
| Working temperature | -60°C to +230°C (constant), up to +250°C (intermittent) |
| Water absorption | 0.2% |
| Fire resistance | Passes FAR 25/JAR 25/CS 25 Appendix F Part 1 and PART 571FMVSS302 |
Installation and care
For optimum performance and longevity, this silicone sponge strip should not be compressed by more than 50% of its original thickness, as excessive compression can damage the cell structure. A maximum compression of 30% is recommended to reduce compression set and extend the life of the seal.
Fitting tips
- Ensure the mating surface is thoroughly clean, dry and degreased before applying self-adhesive strips.
- Do not stretch the strip during installation, as it will naturally try to return to its original length, which can cause the ends to pull away.
- Cut the strip slightly longer than required and compress the ends together for a tight butt joint.
- Use sharp shears or a utility knife for clean, square cuts.
Complete your project
- EPDM Weatherstrip Glazing Seal – 22mm x 19mm – Cut Length
- EPDM Weatherstrip Glazing Seal – 4.75mm Glass to 3mm Panel – Cut Length
- High-Temperature Silicone P Extrusion – 20mm x 8mm – 10m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Can this strip be used outdoors?
Yes, silicone sponge offers excellent weathering, heat and cold resistance, making it highly suitable for exterior applications such as light fittings.
Is it suitable for drinking water applications?
Yes, the material is WRAS approved for use with potable water up to 85°C.
How much compression can it take?
We recommend compressing the strip by no more than 30% of its initial thickness for the best lifespan, and never more than 50%.
Does it have an outer skin?
Yes, unlike strips cut from a flat sheet, this product is extruded with a smooth skin on all four sides to improve moisture and dust resistance.
If you need further assistance selecting the right sealing strip, please contact our team.
Product details
| SKU | IP-SILSP-3-50DF-5-PLAINBAC |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Sponge Rubber Strip – 3mm Thick – 25m Roll