Rubber & FoamSKU IP-SILT-12X15-BLACK
Silicone T Seal Profile – 12mm x 15mm, Food Grade, 7 Colours – 25m Roll
This silicone T seal profile has a 12mm wide flat flange on a 15mm deep stem, for pushing into slots and gaps so the flange sits flush over the joint. It is food grade, comes in seven colours and is sold as one continuous 25m roll.
At a glance
- Silicone T section: 12mm flange, 15mm overall height
- Deep 2.5mm stem anchors firmly in the slot
- Food grade: FDA 21 CFR 177.2600 and EC 1935/2004, plus WRAS approval
- Stays flexible from -50°C to +180°C
- Good resistance to UV, ozone and weathering
- Black, white, translucent, red, green, blue or yellow
Typical uses
- Gap and joint seal on food processing and catering equipment
- Seals on brewery and drinking water equipment
- Joint infill on hot enclosures, ovens and HVAC ducting
- Colour-coded seals for food zones and hygiene areas
- Weatherproof joints on hatches and outdoor panels
Which one do I need?
| Silicone T profile | Stem depth | Best for |
|---|---|---|
| 13mm x 6mm | Shallow | Shallow slots and low-profile joints |
| 14.5mm x 8mm | Medium | Wider flange over a medium slot |
| 14mm x 11mm | Deep | Narrow gaps with more anchoring depth |
| 12mm x 15mm (this item) | Deepest | Deep slots where the seal must not pull out |
Technical drawing
Specification
| Material | Silicone, FDA 21 CFR 177.2600, EC 1935/2004 and WRAS approved |
| Flange width | 12mm |
| Overall height | 15mm |
| Stem thickness | 2.5mm |
| Hardness | 60° Shore A |
| Operating temperature | -50°C to +180°C |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Colours | Black, white, translucent, red, green, blue, yellow |
| Unit of sale | One 25m roll |
How much do I need?
Measure the total length of every slot or joint to be sealed. A food machine with six 1.5m panel joints and two 2m doors (perimeter 6.4m each) needs 9m + 12.8m = 21.8m, which one 25m roll covers with a little spare for trimming.
Fitting tips
- Clean and dry the slot so no grease or debris stops the stem seating.
- Press the stem into the slot along the length, then run a thumb along the flange so it sits flat.
- Cut with a sharp knife for clean square ends at butt joints.
- Where a permanent fix is needed, add a silicone adhesive inside the slot before pressing the stem in.
Complete your project
- Silicone T Seal Profile – 14mm x 11mm – 25m Roll
- Silicone T Seal Profile – 14.5mm x 8mm – 25m Roll
- Silicone T Profile – 13mm x 6mm Food Grade – 25m Roll
Questions
Is this silicone T seal food safe?
Yes. The silicone complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and carries WRAS approval.
Why choose a coloured T profile?
Colour-coded seals help food sites separate zones and spot any piece of seal that has come loose. Translucent suits jobs where the seal should not stand out.
What temperatures can it take?
It stays flexible from -50°C to +180°C, so it suits chillers, ovens and hot enclosures.
Can I use it outdoors?
Yes. Silicone resists UV, ozone and weathering.
How wide a slot does the stem need?
The stem is 2.5mm thick and 13.5mm deep below the flange, so it suits slots of about 2.5mm wide and at least 14mm deep.
Need help choosing the right seal? Contact our team.
Product details
| SKU | IP-SILT-12X15-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 12mm x 15mm, Food Grade, 7 Colours – 25m Roll