Slotted Bulb Door Seal 6.5 x 15.5mm, 1.6mm Slot (IRS0874EP) – Fits Classic Car, Bus & Caravan Edges – Black EPDM – Per Metre

A push-on black EPDM door seal, 6.5 mm wide and 15.5 mm high, with a 1.6 mm slot 8.5 mm deep and a hollow bulb in its rounded base, sold by the metre. It is used on door, window and hatch edges on classic cars, buses, caravans, boats and rail vehicles.

At a glance

Why EPDM

EPDM resists sunlight, ozone and rain, so the bulb keeps its bounce and the slot keeps its grip on exterior edges.

What's in the box

• Your ordered length of IRS0874EP door seal, as one continuous piece

Fitting tips

1. Check the flange. The slot is 1.6 mm wide; measure your flange before ordering.
2. Measure the run. Measure round the opening and round up to whole metres.
3. Clean. Clean and dry the flange edge.
4. Push it on. Press the slot over the flange so the bulb faces the gap.
5. Trim. Cut the ends square and butt them neatly.

Questions buyers ask

Is the price per metre?
Yes. Order the number of metres you need and they arrive as one continuous length.

What flange thickness does it suit?
The slot is 1.6 mm wide, so it suits flanges of about 1 to 1.5 mm.

Where does it seal?
The hollow bulb at the base compresses against the door or frame.

Is it suitable outdoors?
Yes. EPDM is a weather-resistant rubber widely used for exterior seals.

Not sure it is the right profile?
Send us a photo of your old seal's cut end and we will check before you order.

Delivery & help

Dispatched from the UK. Trade orders welcome.