
Rubber & FoamSKU IP-EPDM-26X26X10-5
Solid EPDM U Channel – 26mm x 26mm – Fits 10mm Panels
Price shown updates with the option you pick.
This solid EPDM U channel, 26mm x 26mm, is a heavy round-backed rubber edge protector made to push onto 10mm panels, plates and boards. Its tapered slot grips thick edges firmly and the rounded body cushions knocks; it is sold as one continuous cut length from 5m to 30m.
At a glance
- EPDM U channel 26mm wide x 26mm high with a rounded outer face
- Tapered slot for 10mm panels (10mm mouth narrowing to about 6mm)
- Solid EPDM rubber, 65-75 Shore A, 0.51kg per metre
- Rubber edge protector and bump strip with good weather and ozone resistance
- Thick walls absorb impact on exposed plate edges
- Sold as one continuous length: 5m to 30m
Typical uses
- Edge protection on 10mm steel plate, guards and machine frames
- Capping thick glass, polycarbonate or board edges
- Impact strip on access doors, steps and loading equipment
- Bump protection on vending machines, trolleys and enclosures
- Safety edging on exposed corners in workshops and plant rooms
Which one do I need?
| Edge thickness | Suggested profile |
| 8-10mm plate or board, heavy knocks expected | This 26mm x 26mm solid EPDM U channel |
| 4.5mm panels | A smaller U channel with a 4.5mm slot |
| 3mm panels | A U channel with a 3mm slot and round cord |
| Thin 1.6mm sheet | A narrow, deep 1.6mm U channel |
Technical drawing
Specification
| Material | Solid EPDM |
| Colour | Black |
| Overall size | 26mm wide x 26mm high |
| Fits panel | 10mm (slot tapers 10mm to 6mm) |
| Hardness | 65-75 Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Tear strength | 50 kN/m |
| Weight | 0.51kg per metre |
| Unit of sale | One continuous length, 5m to 30m |
Download the technical data sheet (PDF)
How much do I need?
Add up every edge to be covered and allow about 5% for trimming. Example: edging all four sides of a 2.4m x 1.2m plate needs 7.2m; with 5% spare that is 7.6m, so choose an 8m length. Ordering one continuous length avoids joins.
Fitting tips
- Deburr and clean the plate edge before fitting.
- Start at one end and push the channel on progressively; a rubber mallet helps on 10mm plate.
- Cut with a sharp knife or rubber shears for a square end.
- For a permanent fix, bond with a polyurethane or silicone sealant.
- On 8mm plate, bond a thin neoprene strip in the slot to take up the gap.
Complete your project
- EPDM Rubber U Channel – 5.5mm x 19.7mm – 1.6mm Panel Fit
- U Channel for 4.5mm Panel – 8 x 8.2mm – Black EPDM
- U Channel – 6.3mm Wide x 17.4mm Deep Inside – Black EPDM Edge Trim
Questions
Can this EPDM U channel be used outdoors?
Yes. EPDM resists weathering, ozone and temperature changes, so it suits outdoor plate and frame edges.
Will it fit a 6mm panel?
The slot tapers to about 6mm, but it is designed for 10mm; on thinner panels bond a packing strip inside for a firm grip.
Is it solid or sponge rubber?
Solid EPDM, so it holds its shape and takes repeated knocks.
Does it need adhesive?
The tapered slot grips on its own; use a sealant where it must not move or must seal.
How is it supplied?
As one continuous length of the size you choose, from 5m to 30m.
Need help choosing a rubber edge protector? Contact our team for advice.
Product details
| SKU | IP-EPDM-26X26X10-5 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Solid EPDM U Channel – 26mm x 26mm – Fits 10mm Panels