Solid Red PVC Strip Roll – Opaque Coloured Grade for Zoning & Screening – 50m

A 50 m roll of solid red flexible PVC strip for making or repairing opaque strip curtains, ideal for marking out zones, screening work areas and making bold coloured curtains that stand out. One unit is one 50 m roll in the strip size you choose.

At a glance

• Grade: standard flexible PVC strip, solid red and fully opaque
• Strip sizes: 200mm x 2mm, 300mm x 3mm and 400mm x 4mm
• Roll length: 50 metres, for you to cut into strips
• Not see-through: blocks the view and light through the opening
• REACH compliant PVC
• One unit: one 50 m roll

Which size do I need?

Technical drawing

Two adjacent solid red strips overlapping by half their width. Dimensions are nominal.

Specification

How to calculate strips from a roll

Strips needed = opening width ÷ (strip width − overlap), rounded up. Metres of roll = strips × (opening height + hanging allowance).

Example: a doorway 1,500 mm wide and 2,400 mm high, using 200 mm strips with a 50% overlap (100 mm). Strips needed = 1,500 ÷ 100 = 15. With 100 mm allowance per strip, roll needed = 15 × 2.5 m = 37.5 m, so one 50 m roll covers it. For rails, see our PVC strip curtains and fittings.

Cutting and fitting tips

• Cut square with a sharp knife against a straight edge, and cut every strip to the same length.
• Punch or drill hanger holes to suit your rail or hook-on system, keeping them in line on every strip.
• Because solid strips cannot be seen through, avoid them on doorways shared by vehicles and pedestrians unless you add clear vision strips.

Questions

Can you see through these strips?
No. Solid red strip is fully opaque, so it hides the area behind the curtain and blocks light.

Why choose red rather than clear?
Solid red strips screen the area behind them and make the doorway highly noticeable, which helps mark restricted or separate zones. Choose clear if people or vehicles need to see through.

What does one unit include?
One 50 m roll of the strip size you select. You cut it into strips yourself.

Which strip size suits a forklift doorway?
The 300mm x 3mm strip is the usual choice for pallet trucks and forklifts. Move up to 400mm x 4mm for heavy or motorised traffic.

How much overlap should I use?
40–56% gives a lighter, lower-cost curtain; 80–100% hangs better and seals more fully.

Need help choosing a size or colour? Contact us via our contact page.