
Rubber & FoamSKU IP-TPEES-40X35.9-STD
TPE Expansion Seal – 40mm x 35.9mm – 25m Roll
This TPE expansion seal, 40mm x 35.9mm, is a hollow multi-chamber joint seal that presses into concrete movement joints 15mm to 25mm wide, flexing as the structure expands and contracts while keeping water and debris out. It is sold as one continuous 25m roll in black.
At a glance
- 40mm-wide top over a 27mm body, 35.9mm deep overall
- Fits joint widths from 15mm to 25mm
- Hollow chambers compress and recover with structural movement
- Wide top flange sits over the joint and reduces trip edges
- TPE, 70 Shore A, good abrasion, weathering and UV resistance
- Works from -50°C to +90°C
Typical uses
- Movement joints in multi-storey car park decks
- Bridge decks and approach slabs, large or small
- Joints in heavy concrete walls and roofs
- Tunnel linings and water treatment plant structures
Which one do I need?
| Expansion seal | Best for |
|---|---|
| 41mm x 31mm TPE | Similar width with a shallower 31mm depth |
| 40mm x 35.9mm TPE (this product) | Joints 15mm to 25mm wide where a deeper body is wanted |
| 63mm x 40mm TPE heavy-duty | Wider joints on bridges and walls |
| 65mm x 50mm TPE | Joints 35mm to 45mm wide |
| 80mm x 60mm EPDM heavy-duty | Joints 60mm to 75mm wide |
Technical drawing
Specification
| Profile | Hollow multi-chamber expansion joint seal |
| Size | 40mm wide x 35.9mm deep |
| Joint width | 15mm to 25mm |
| Material | Thermoplastic elastomer (TPE) |
| Hardness | 70 Shore A |
| Weight | 415g per metre |
| Operating temperature | -50°C to +90°C |
| Tolerance | ISO 3302-1 E2 / L2 |
| Colour | Black |
| Unit of sale | One 25m roll |
How much do I need?
Measure the total length of every joint and add about 5% for trimming at ends and junctions. Example: a car park deck with six 18m joints needs 108m, plus 5% = 113.4m, so order five 25m rolls (125m).
Fitting tips
- Check the joint is between 15mm and 25mm wide along its whole length before ordering.
- Clean out dust, laitance and loose material so the seal sits evenly in the joint.
- Push the body into the joint by hand or with a blunt roller until the top flange sits evenly over both edges.
- Cut cleanly with a sharp knife and butt the ends tightly; do not stretch the seal during fitting.
Complete your project
- TPE Expansion Seal – 41mm x 31mm – 25m Coil
- TPE Expansion Joint Seal – 65mm x 50mm – 25m Coil
- Heavy-Duty EPDM Expansion Seal – 80mm x 60mm – 10m Roll
Questions
What joint width does the 40mm x 35.9mm expansion seal fit?
It is made for joints from 15mm to 25mm wide. For wider joints, choose one of the larger seals in the table above.
Can this expansion joint seal be used outdoors?
Yes. The TPE resists weathering and UV, so it suits exposed car park decks, bridges and roofs, and works from -50°C to +90°C.
How is it fitted?
Clean the joint, then press the hollow body down into it until the top flange sits evenly over both edges. No special tools are needed.
How is it supplied?
As one continuous 25m roll that can be cut to length on site with a sharp knife.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-TPEES-40X35.9-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Expansion Seal – 40mm x 35.9mm – 25m Roll