
Rubber & FoamSKU IP-WHS-70X40-STD
Watertight Hatch Seal – 70mm x 40mm – 10m Length
This composite watertight hatch seal gives a secure, weather-resistant closure on doors and hatches on boats and ships. A highly compressible open-cell natural rubber sponge core sits inside a tough solid EPDM rubber skin, so the seal closes tightly against the hatch lip and keeps water and air out. Sold as one 10m length.
At a glance
- 70mm wide x 40mm high profile
- Solid EPDM rubber outer skin, 67° Shore A
- Open-cell natural rubber sponge core for high compression
- Chamfered corners so the seal does not catch when the hatch closes
- Good resistance to ozone, UV and weathering
- Working temperature -30°C to +70°C
- Supplied as one 10m length
Typical uses
- Cargo hatch covers
- Watertight and weathertight access doors
- Deck skylights
- Ullage plugs and small deck openings
- Replacement seals on naval vessels, ferries and passenger ships
Which one do I need?
| Profile | Choose it when |
| 57mm x 32mm | The hatch channel is about 57mm wide and an uncompressed piece of the old seal stands about 32mm high |
| 70mm x 32mm | A 70mm channel with a shallow closing gap |
| 70mm x 40mm (this seal) | A 70mm channel with a deeper closing gap, or where the old seal has taken a permanent set and more height is needed |
Measure the inside width of the channel and the height of a clean, uncompressed piece of the old seal, then pick the profile that matches both.
Technical drawing
Specification
| Profile size | 70mm wide x 40mm high |
| Unit of sale | One 10m length |
| Weight | 2.52kg per metre |
| Outer skin material | Solid EPDM rubber |
| Core material | Open-cell natural rubber (NR) sponge |
| Hardness (outer skin) | 67° Shore A |
| Hardness (sponge) | 76° Shore OO |
| Tensile strength | 7.2MPa (outer skin), 2.4MPa (sponge) |
| Compression set (24h at 100°C, 25%) | 23% (outer skin), 15% (sponge) |
| Rebound resilience | 23% (outer skin), 25% (sponge) |
| Elongation at break | 305% (outer skin), 800% (sponge) |
| Temperature range | -30°C to +70°C |
| Colour | Black |
How much do I need?
Measure the full perimeter of the hatch channel. Example: a hatch opening of 1200mm x 800mm has a perimeter of 2 x (1.2m + 0.8m) = 4.0m, so one 10m length seals two hatches of that size with about 2m to spare. At 2.52kg per metre a full 10m length weighs about 25kg, so plan handling on deck accordingly.
Fitting tips
- Remove all old seal and adhesive, then clean and dry the channel before fitting.
- Press the seal into the channel without stretching it; a stretched seal shrinks back and opens a gap.
- Fit the chamfered edges so they face the closing hatch and cannot catch.
- Make the joint where water is least likely to sit, and cut the ends square with a sharp knife for a tight butt joint.
Complete your project
- Watertight Hatch Seal – 57mm x 32mm – 10m Length
- Watertight Hatch Seal – 70mm x 32mm – 10m Length
- Compact TPE D Fender – 50mm x 30mm – 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Is this seal suitable for outdoor marine use?
Yes. The solid EPDM outer skin resists weathering, UV and ozone.
Why does it have a sponge core?
The open-cell sponge core makes the seal very compressible, so it closes tightly against an uneven hatch lip.
Can I buy a shorter length?
This seal is sold as one 10m length; cut it to size on site.
How do I cut it?
Use a sharp utility knife or heavy-duty shears and cut square for a tight joint.
When should I choose 40mm rather than 32mm height?
Choose 40mm when the closing gap is deeper or the old seal has flattened and no longer seals.
Need help choosing? Contact our team.
Product details
| SKU | IP-WHS-70X40-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Watertight Hatch Seal – 70mm x 40mm – 10m Length