For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

Nylon Rod

30 products

Showing 1 - 24 of 30 products

Nylon Rod cut to your exact diameter. Nylon is tough, low-friction and highly wear-resistant, the default choice for machined bearings, gears, rollers and wear pads, with a continuous service range of -40°C to +100°C, which makes this rod and round bar a dependable choice wherever those properties matter. Every piece is cut from stock we hold ourselves in the UK.

Cut to any diameter — no minimum order quantity
Also specified as Nylon 6 / Nylon 66 (polyamide)
Service temperature -40°C to +100°C
Same-day despatch on orders placed before 2pm
Trade accounts and volume pricing available

Related: Nylon

Cut-to-size and bulk pricing available on every line. Ordered before 2pm on a working day, UK stock items ship same day. Need a size that isn't listed? Contact our technical team and we will quote it.

Showing 1 - 24 of 30 products

Black-gloved hands steadying a long black nylon rod over a steel bench, coarse cut end face to the left

Black nylon 6 rod on white, angled with a slightly grainy sawn end face at the lower left

Black Nylon 6 Rod 10–300mm | Wear-Resistant Engineering Plastic

From £10.00 inc VAT

Grey-gloved hand holding a long black nylon rod receding down a workshop floor, end face to camera

Matt black nylon 6.6 rod lying diagonally on white, brushed round end face towards the bottom left

Black Nylon 6.6 Rod 16–100mm | Wear-Resistant Engineering Plastic

From £13.96 inc VAT

Matt black cast nylon rod lying diagonally on white, sawn end face angled towards the camera

Cream natural cast nylon rod held in grey knitted gloves above a blue machine bed set with steel dies

Cast Nylon 6 Black Rod 160mm Diameter for Engineering Applications 160mm to 300mm diameter

From £89.12 inc VAT

Black cast nylon rod close up on white, its fine-grained sawn end face nearest the camera

Matt black cast nylon rod angled on white, its grainy round sawn face low at the left

Cast Nylon 6 Black Rod for Engineering Applications 10mm to 150mm diameter

From £12.18 inc VAT

Cut length of natural cream nylon rod on white, slightly glossy surface and flat end face on the left

Single ivory cast nylon rod shown whole on white, pearly sheen and a smooth round end face

Cast Nylon 6 Natural Rod for Engineering Applications 6mm to 90mm diameter

From £11.20 inc VAT

Pale cream cast nylon rod cropped close on white, rounded end face towards the bottom right

Cream natural cast nylon 6 rod on a workshop bench with callipers and a technical drawing

Cast Nylon 6 Rod Natural 6mm to 50mm Diameter for Gears & Bearings

From £13.75 inc VAT

Matt dark green cast polyamide rod angled across a white background, flat cut end at the lower left

Trio of olive-green oil-filled nylon rods graded by size on white, dull sawn faces at the left

Cast Polyamide 6 Oil-Filled Green Rod for High Load Applications 50mm to 300mm diameter

From £32.00 inc VAT

Pale cream nylon rod shown large on white, matt satin surface and flat end face on the left

Smooth ivory nylon 6.6 rod held end-on in cream gloves, lathe chuck and swarf blurred behind

Natural Nylon 6.6 Rod for Engineering Applications 75mm to 200mm diameter

From £58.30 inc VAT

Three olive-green nylon billets stacked thick to thin on white, matt cut faces towards the left

Khaki-green nylon billet held in a cream knitted glove, brushed end face forward, machine shop behind

Nylon 6 Khaki-Green Rod 50mm to 150mm dia for Insulators & rollers

From £86.54 inc VAT

Large ivory nylon billet in front of a matt black billet, both short heavy cylinders on white

Heavy ivory nylon 6 billet supported in blue-palmed gloves, lathe fixtures and bushes behind

Nylon 6 Natural (ivory) / Black Rod 260mm to 325mm dia for Rollers & bearings

From £1,861.72 inc VAT

Blue-palmed gloves holding a large cream nylon billet, machined bushes and steel behind

Cream nylon billet flanked by a black rod and a slim white rod, studio group on white

Nylon 6 Rods for Engineering Applications 260mm to 500mm Diameter

From £1,861.72 inc VAT

Dark grey-black nylon rod cropped close on a beige ground, sawn end face at the right

Black nylon rod on a rusty steel bench over drawings, with a spanner and callipers alongside

Nylon 6.6 Black Plastic Rod

From £22.51 inc VAT

Matt black nylon 66 rod angled across a white background, flat sawn end on the left

Matt black nylon 6.6 bar shown whole on white, faint tool marks and a clean round end face

Nylon 6.6 Black Rod for Industrial Applications 16mm to 100mm diameter

From £13.96 inc VAT

Cropped cream nylon 6.6 rod on white, glossy highlight along its length and flat end to the right

Ivory nylon 6.6 rod on a steel bench across cream drawings, callipers and a pegboard behind

Nylon 6.6 Natural Plastic Rod - 4mm To 45mm Thick

From £15.18 inc VAT

Glossy cream nylon 66 rod filling the frame on white, flat cut end at the lower left

Whole cream nylon 6.6 bar on a white sweep, waxy sheen and a smooth round cut face

Nylon 6.6 Natural Rod for Engineering Applications 4mm to 70mm diameter

From £11.66 inc VAT

Three black nylon rods in stepped diameters stacked on white, all cut ends facing the camera

Long black nylon rod held in a dark grey knitted glove, round end face forward, pale workshop wall behind

Nylon 66 Black Rod 10mm to 30mm dia for Cams & rollers

From £33.50 inc VAT

Black nylon 66 bar running diagonally across a white ground, round sawn face at the lower left

Three matt black nylon 66 bars of stepped size leaning together on a white ground

Nylon 66 Black Rod 40mm to 150mm dia for Insulators & conveyor parts

From £168.76 inc VAT

Three cream nylon 66 rods fanned thick to thin on white, rounded ends towards the front

Single matt black nylon 66 rod on white, its turned end face angled towards the viewer

Nylon 66 Natural (cream) / Black Rod 40mm to 60mm dia for Bearings & rollers

From £90.58 inc VAT

Four cream nylon 66 bars stepped slim to thick across white, cut faces towards the right

Slim black nylon 66 rod laid across a white studio background, flat cut end nearest the camera

Nylon 66 Natural (cream) / Black Rod 5mm to 32mm dia for Insulators & rollers

From £82.66 inc VAT

Four off-white nylon 66 bars laid parallel on white, stepped diameters with ends to the right

Short cream nylon 66 offcut alone on white, smooth turned end face towards the camera

Nylon 66 Natural (cream) Rod 6.35mm to 50mm dia for Wear pads & bushes

From £285.98 inc VAT

One thick and two slim cream nylon 66 rods grouped on white, round ends to the right

Wide ivory nylon billet cupped in grey and black gloves, green lathe and swarf tray behind

Nylon 66 Natural (cream) Rod 65mm to 200mm dia for Cams & conveyor parts

From £239.04 inc VAT

Cream-gloved hands cradling a smooth ivory nylon rod end-on, lathe and swarf blurred behind

Four off-white nylon rods of stepped diameter laid parallel on white, rounded ends to the right

Nylon 66 Rod - Precision Ground - Diameter 6.35mm to 50mm

From £285.98 inc VAT

Short pale cream nylon offcut cupped in black gloves, lathe chuck out of focus behind

Four cream nylon rods from slim to thick angled across a white studio background, ends to the right

Nylon 66 Rods for Engineering Applications 5mm to 32mm Diameter

From £82.66 inc VAT

Large ivory nylon billet held in grey and black gloves, broad sawn face forward, green lathe behind

Three cream nylon rods, one thick and two slim, grouped on white with cut ends to the right

Nylon 66 Rods for Engineering: 65mm to 200mm Diameters

From £239.04 inc VAT

Page 1 / 2Next

Why buy direct from Industrial Polymers

Free UK delivery, no minimum

Order by 2pm Mon–Fri and it's dispatched the same day. Most mainland orders arrive in 2–3 working days.

Delivery details ›

Cut to your exact size

Sheets and rods cut to your spec. Pick a size on the product page, or send us a drawing.

Get a cutting quote ›

Talk to a materials specialist

Not sure which plastic or thickness? Call 01282 277786, Mon–Fri 8:30–17:00.

Call us now ›

Trade & bulk pricing

Volume quotes on full sheets, rolls and pallet quantities from our Burnley team.

Request a trade quote ›