
Rubber & FoamSKU IP-EPDML-100X50X7-STD
Black EPDM Rubber L Profile – 100mm x 50mm x 7mm – 4m Length
This EPDM rubber L profile 100mm x 50mm x 7mm is a heavy-duty black unequal angle trim, sold as one continuous 4m length. The wide 100mm leg gives a large bonding or bearing face, while the 50mm leg wraps and protects the edge, making it a tough rubber angle for dock steps, plinths, machine bases and enclosures.
At a glance
- Unequal L profile: 100mm leg and 50mm leg, both 7mm thick
- Black EPDM rubber angle trim, 70° Shore A
- Sold per 4m length, about 2.04kg per metre
- Resists UV, ozone and weathering for indoor and outdoor edge protection
- Working temperature -40°C to 120°C
- Sharp square corner sits flush on 90° edges
Typical uses
- Corner and edge protector on concrete steps, dock edges and plinths
- Impact strip on machine bases, guards and steel enclosures
- Weather seal and drip edge around doors, hatches and cabinets
- Rubber angle trim on vehicle bodies, trailers and caravans
- Covering sharp sheet-metal or glass edges to cut injury and damage
Which one do I need?
| Profile | Best for |
|---|---|
| 50mm x 50mm x 5.5mm L | Lighter edges and panels where both faces are equal |
| 60mm x 60mm x 10mm L | Heavy impact on equal corners, dock and column edges |
| 100mm x 50mm x 7mm L (this item) | Edges that need a wide fixing face on one side and a shorter wrap on the other, such as step nosings and plinth tops |
Technical drawing
Specification
| Material | EPDM (ethylene propylene diene monomer) rubber |
| Colour | Black |
| Profile | Unequal L (angle) |
| Leg sizes | 100mm x 50mm |
| Thickness | 7mm |
| Unit of sale | One 4m length |
| Hardness | 70° Shore A |
| Weight | 2.04kg per metre |
| Temperature range | -40°C to 120°C |
| Tensile strength | 7.8 MPa |
| Elongation at break | 340% |
| Tear resistance | 22.18 N/mm |
| Compression set | 23.12% (22 h at 100°C) |
| Tolerance class | ISO 3302-1 E2 – L2 |
How much do I need?
Measure every edge you want to cover and add the lengths together, then divide by 4 and round up. Example: a loading step 6.5m long with two 1.2m returns needs 8.9m, so order 3 lengths (12m), leaving spare for mitred corners.
Fitting tips
- Decide which face needs the wide 100mm leg before cutting – usually the top or fixing face.
- Clean and degrease the surface; bond with a polyurethane or silicone sealant for a permanent fix.
- Cut with a sharp knife or fine-toothed saw; mitre corners at 45° for a neat finish.
- Run sealant along the inside corner as well as both faces for full contact, then allow it to cure before loading.
Complete your project
- EPDM Rubber L Profile – 60mm x 60mm x 10mm – 3m Length
- Black TPE Square U Channel – 40mm x 20.5mm – 25m Coil
- Round U Channel Edge Protector – 26mm Diameter – Black EPDM
Questions
Can this rubber angle trim be used outdoors?
Yes. EPDM resists UV, ozone and weathering, so the profile keeps its flexibility outside.
Is the 100mm leg or the 50mm leg fitted to the top of a step?
Either way works. Most fitters put the 100mm leg on the tread for a wider bonding face and the 50mm leg over the riser.
How heavy is a full length?
At 2.04kg per metre a 4m length weighs about 8.2kg.
Do I need adhesive?
For permanent edge protection, yes – a polyurethane or silicone sealant gives a secure bond. Light-duty trims can sometimes be held by friction.
Can I join two lengths?
Butt the cut ends tightly and bond both into place; a dab of sealant on the joint keeps water out.
Need help choosing an edge protector? Contact our team.
Product details
| SKU | IP-EPDML-100X50X7-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black EPDM Rubber L Profile – 100mm x 50mm x 7mm – 4m Length