
Rubber & FoamSKU IP-TPEP-21X6-STD
Black TPE P Profile – 21mm Flange x 6mm Hollow Bulb – 25m Coil
This TPE P profile 21mm x 6mm is a black seal with a thin, flexible 21mm fixing flange and a 6mm hollow round bulb with a 4mm bore, for sealing small gaps on doors, glass panels and enclosures. It is sold per 25m coil, ready to cut to length.
At a glance
- TPE P profile 21mm x 6mm: 21mm flat flange, 6mm hollow bulb with a 4mm bore
- Thin 1mm flange that follows curves and tucks under trims
- 65° Shore A thermoplastic elastomer, non-marking black
- Thin-walled bulb gives a soft seal with low closing force
- Working range -40°C to +90°C
- Sold as one continuous 25m coil
Typical uses
- Seals between glass or polycarbonate panels and their frames
- Door seals on electrical and control enclosures
- Seals under clamping strips and cover plates
- Draught and dust seals on cabinet doors and access hatches
- Splash seals on food processing equipment guards
Which one do I need?
| Profile | Best for |
|---|---|
| 16mm flange x 6mm hollow bulb | Narrow fixing faces and the smallest gaps |
| 21mm flange x 6mm hollow bulb (this one) | Same small bulb with a wider, thinner flange to fix to |
| 20mm flange x 8mm hollow bulb | Slightly larger gaps, very soft closing |
| 28mm flange x 10.5mm bulb | Bigger gaps and uneven frames |
| 35mm flange x 10mm solid bead | Firm, hard-wearing seal with a wide fixing flange |
Technical drawing
Specification
| Material | Thermoplastic elastomer (TPE) |
| Colour | Black, non-marking |
| Profile | P section: flat flange with hollow round bulb |
| Flange length | 21mm |
| Bulb diameter | 6mm (hollow, 4mm bore) |
| Flange thickness | 1mm |
| Hardness | 65° Shore A |
| Temperature range | -40°C to +90°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | 25m coil |
How much do I need?
Measure the perimeter of each opening and add about 5% for trimming and corners. Example: three guard panels of 1000mm x 600mm need 3 x 3.2m = 9.6m, plus 5% = about 10.1m, so one 25m coil does all three with spare.
Fitting tips
- Slide the thin flange under a clamping strip or bond it with a rubber adhesive
- Clean and dry the fixing face first so the flange lies flat
- Lay the seal in without stretching it
- Position the bulb so it meets the closing face squarely
- Mitre or notch the flange at corners to keep the bulb continuous
Complete your project
- TPE P Profile – 20mm Flange x 8mm Hollow Bulb – 25m Coil
- Black TPE P Profile – 27mm Flange x 7mm Bulb – 25m Coil
- Black TPE P Profile – 28mm Flange, 10.5mm Bulb – 25m Coil
Questions
Is the 6mm bulb hollow or solid?
Hollow, with a 4mm bore. The thin wall makes it softer than the 16mm x 6mm version, which has a 2mm bore.
Why choose the 21mm flange?
It gives more width to bond or clamp, and at 1mm thick it slips under trims and cover strips easily.
Will it leave marks?
No. The TPE compound is non-marking.
Can I cut it to length?
Yes. It cuts cleanly with sharp shears or a knife.
Is it suitable outdoors?
Yes. It is waterproof and works from -40°C to +90°C.
Need help choosing the right seal? Contact our team for advice.
Product details
| SKU | IP-TPEP-21X6-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black TPE P Profile – 21mm Flange x 6mm Hollow Bulb – 25m Coil