Shower Door Brush Seal 6mm x 10mm for Bifold & Channel Doors

What this seal is

A brush seal for bifold and channel shower doors, pairing a 6mm T-shaped backing with a 10mm bristle pile. The rigid backing strip slides into the channel in your door frame — no adhesive needed — and the dense synthetic bristles sweep the gap below closed.

The longer 10mm bristles suit doors that sit higher off the tray, sweeping over lips and slight slopes without the drag or fold-over a solid blade produces on a folding door.

Specification

Why fit this seal

Smooth-moving doors. Bristles sweep rather than drag, so a bifold door folds and glides without the squeak or snag a worn solid blade produces.

Copes with taller gaps. The 10mm pile reaches doors that hang higher off the tray, compressing where the gap narrows and keeping contact along the full width.

No adhesive, no mess. The 6mm backing simply slides along the existing channel — no glue, and it slides out just as easily when next due a refresh.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Check your channel slot takes a 6mm backing and the gap below is around 10mm, so the bristle tips just kiss the surface.

2. Choose. Pick 1000mm or 2000mm — whichever is at or above your door width — ready to trim down.

3. Fit. Slide the old seal out, clean the channel, cut the backing to your door's width, then slide the T backing along the channel until seated.

Not sure it fits?

We stock nine other brush size combinations, so if your measurements differ there will be a match. Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right size before you order — usually the same working day.