
Rubber & FoamSKU IP-CWS-31X15-STD
Caravan Window Seal – 31mm x 15mm for 30mm Panels – 20m Coil
This caravan window seal 31mm x 15mm is a black EPDM replacement seal for caravan and motorhome opening windows, made to fit 30mm wall panels. It combines a solid EPDM body that grips the panel edge with a soft sponge bead that the window closes onto, and it is sold as one continuous 20m coil.
At a glance
- 31mm x 15mm profile for 30mm caravan wall panels
- Solid EPDM body grips the aperture edge
- Cellular EPDM sponge bead gives a soft, watertight window seal
- Mastic section for a weatherproof joint to the panel
- EPDM resists UV, ozone and weathering; -40°C to +90°C
- One continuous 20m coil – enough for several windows
Typical uses
- Replacing a perished or leaking caravan opening window seal
- Refurbishing motorhome and campervan opening windows
- Re-sealing windows after body panel or frame repairs
- Stocking a standard window rubber for caravan service and repair workshops
- Draught-proofing hinged hatches cut into 30mm sandwich panels
Which one do I need?
| Your caravan wall / panel thickness | Seal to choose |
|---|---|
| 28.5mm | Caravan opening window seal for 28.5mm panels |
| 30mm | This seal – 31mm x 15mm |
| 33mm to 34mm | Caravan window seal 34mm x 15mm |
Measure the wall thickness at the window aperture with a vernier or steel rule, not the old seal – a worn seal is usually flattened and reads smaller than it should.
Technical drawing
Specification
| Material | Solid EPDM body with cellular EPDM sponge bead |
| Profile size | 31mm x 15mm |
| To fit panel | 30mm |
| Colour | Black |
| Hardness (solid section) | 65° to 75° Shore A |
| Tensile strength | 8.5 MPa |
| Elongation at break | 285% |
| Compression set (70°C, 22 hrs) | 20% |
| Operating temperature | -40°C to +90°C |
| Fitting | Push-on, with mastic section |
| Unit of sale | One continuous 20 m coil |
How much do I need?
Add up the perimeter of each window aperture. A typical 800mm x 500mm opening window needs 2 x (800 + 500) = 2.6m, plus about 50mm for a tidy butt joint – call it 2.65m. One 20m coil therefore re-seals seven windows of that size, which covers most single-axle caravans in one order. For a large front window of 1,500mm x 600mm allow 4.25m.
Fitting tips
- Strip every trace of old seal and sealant from the aperture, then wipe the edge clean and dry.
- Start at the middle of the bottom edge so the joint sits where water drains away, not at the top.
- Push the seal on without stretching it and ease a little extra into each corner; stretched rubber shrinks back and opens gaps.
- Cut the ends square with a sharp knife and butt them tightly together.
- Close the window on the new seal and check the sponge bead compresses evenly all the way round.
Complete your project
- Caravan window seal for 33mm to 34mm panels
- Caravan opening window seal for 28.5mm panels – 20m coil
- Fixed window rubber for 30mm caravan panels
- EPDM sponge caravan seal 9mm x 14mm
Questions
Will this 31mm x 15mm seal fit my caravan?
It fits caravan and motorhome walls of 30mm. Measure the wall at the window aperture; if it is 28.5mm, 30mm or 33-34mm, use the table above to pick the matching seal.
Is it supplied in one piece?
Yes. It comes as a single continuous 20m coil, so every window can be done with one joint.
Do I need extra sealant?
Usually not – the seal has its own mastic section. Follow your caravan maker's guidance if the aperture is damaged or uneven.
Will the sponge bead flatten over time?
The EPDM sponge has a low compression set (20% after 22 hours at 70°C), so it recovers well after the window is opened and closed.
Is this caravan window rubber suitable for fixed windows?
It is made for opening windows. For fixed glazing in 30mm panels, our fixed window rubber with filler strip is the better choice.
Not sure which profile you need? Contact our team with your wall thickness and a photo of the old seal.
Product details
| SKU | IP-CWS-31X15-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Caravan Window Seal – 31mm x 15mm for 30mm Panels – 20m Coil