
Rubber & FoamSKU IP-CDP-63.5X15-BLK
Elastomer Cord Protector – 63.5mm x 15mm Single Channel – 9m Roll
This cord protector 63.5mm x 15mm is a low-profile black elastomer cable cover that hides a trailing lead under a smooth ramp, so people can walk or wheel chairs over it without tripping. It is sold as one continuous 9m roll that you cut to the lengths your floor layout needs.
At a glance
- 63.5mm wide x 15mm high single-channel floor cable cover
- One 16mm x 6.4mm channel for a power lead or a couple of data cables
- Split base: press the cable in from underneath, no tools needed
- Ribbed underside grips carpet, tile, vinyl and wood floors
- Hard-wearing 85 Shore A elastomer, black
- Supplied as a 9m roll – cut to length with a sharp knife
Typical uses
- Covering desk power and network leads that cross office walkways
- Classroom, lecture-hall and meeting-room cable runs
- Temporary cable routes at exhibitions, shops and reception areas
- Keeping extension leads tidy in light workshops and labs
- Trip-hazard control for facilities and health and safety teams
Which one do I need?
| Profile | Size (W x H) | Best for |
|---|---|---|
| Low profile cable protector | 68 x 11mm | Thin leads where the lowest ramp matters |
| Cord protector 63.5 x 15 (this product) | 63.5 x 15mm | One standard power lead or 2 thin data cables, 9m continuous roll |
| Multi-compartment cable protector | 83 x 14mm | Separating several small cables |
| Rubber cable protector 98 x 13 | 98 x 13mm | Wider light-duty runs, cut lengths |
Technical drawing
Specification
| Size | 63.5mm wide x 15mm high |
| Cable channel | 16mm x 6.4mm, single |
| Material | Elastomer |
| Colour | Black |
| Hardness | 85° Shore A |
| Tensile strength | 15.1 MPa |
| Elongation at break | 258% |
| Abrasion | 0.21 cm³ per 1.61 km |
| Rebound resilience | 31% |
| Working temperature | -15°C to +55°C |
| Base | Split for cable insertion, ribbed for grip |
| Supplied as | 9m continuous roll |
| Intended use | Indoor |
How much do I need?
Measure the walkway the cable crosses and add about 150mm at each end so the cable enters and leaves the cover away from foot traffic. Example: three desk crossings of 1.2m each need 3 x 1.5m = 4.5m, so one 9m roll covers six such crossings with no joins.
Fitting tips
- Lay the roll flat at room temperature for a few hours so it relaxes before cutting
- Cut square with a sharp utility knife against a straight edge for neat ends
- Open the split base and press the cable in from one end, working along the length
- Clean and dry the floor first so the ribbed base grips well
Complete your project
- Low Profile Cable Protector – 68mm x 11mm
- Multi-Compartment Cable Protector – 83mm x 14mm
- Hazard Warning Cable Protector – 68mm x 15mm
Questions
Can I cut this cord protector to length?
Yes. A sharp utility knife cuts the 9m roll cleanly; cut against a straight edge for a square end.
How many cables fit in the channel?
The 16mm x 6.4mm channel suits one standard flat or round power lead, or a couple of thin network or data cables.
Will it slide on smooth floors?
The ribbed underside grips carpet, tile, vinyl, wood and sealed concrete; keep the floor clean and dry.
Can I use it outdoors?
It is designed for indoor floors with a working range of -15°C to +55°C. For outdoor or vehicle traffic choose one of our heavy-duty rubber cable protectors.
Is it suitable for wheelchairs and trolleys?
Its 15mm height and sloped sides let light trolleys and wheelchairs roll over it; it is not rated for vehicles.
Need help choosing? Our team is happy to advise – contact us.
Product details
| SKU | IP-CDP-63.5X15-BLK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Elastomer Cord Protector – 63.5mm x 15mm Single Channel – 9m Roll