
Rubber & FoamSKU IP-LPCP-68X11-1M-BLACK
Low Profile Cable Protector – 68mm x 11mm, Single Channel – Per Length
Price shown updates with the option you pick.
This low profile cable protector 68mm x 11mm covers a single small cable across offices, print rooms, server rooms and interior walkways, removing the trip hazard while staying low enough for wheelchairs to cross. Choose a 1m, 1.5m, 3m, 9m or 25m length in black, grey or beige.
At a glance
- Slim floor cable cover just 68mm wide and 11mm high
- One 14mm x 8mm channel for a power, data or phone cable
- Snap-fit base: open the slot and press the cable in, no threading
- Natural rubber / SBR blend, 75° ±5° Shore A
- Fire tested to BS 476 Part 7 Class 3, halogen free, low smoke and fume
- Black, grey or beige to blend with carpet, vinyl or concrete
Typical uses
- Desk power and data leads crossing office floors
- Printer and copier cables in print and post rooms
- Patch and power leads across server room aisles
- Temporary cable runs in corridors, receptions and commercial interiors
Which one do I need?
| Floor cable protector | Channel | Best for |
|---|---|---|
| 68mm x 11mm (this item) | 14 x 8mm | One small cable in offices and walkways; neutral colours |
| 68mm x 15mm hazard warning | Single | The same footprint with black and yellow warning stripes |
| 83mm x 14mm low profile | Larger | Slightly thicker cables or two thin leads |
| 127mm x 28mm industrial | 23mm | Heavier cables and areas with vehicle traffic |
Technical drawing
Specification
| Unit of sale | One length: 1m, 1.5m, 3m, 9m or 25m |
| Width | 68mm |
| Height | 11mm |
| Channel | 14mm wide x 8mm high |
| Material | Natural rubber / SBR blend |
| Hardness | 75° ±5° Shore A |
| Colours | Black, grey, beige |
| Fire performance | Surface spread of flame tested to BS 476 Part 7 Class 3 |
| Electrical test | Tested to BS 903 Part C5 at 500V |
| Halogens | None |
| Outdoor use | UV stable |
How much do I need?
Measure the floor distance the cable crosses and pick the next length up. Example: a lead crossing a 2.4m office aisle needs the 3m length; a 7m run from a wall socket to a desk island needs the 9m length. For long corridors the 25m roll can be cut into shorter pieces with a sharp knife.
Fitting tips
- Vacuum or sweep the floor so the base sits flat.
- Unroll longer lengths and let them relax at room temperature before fitting.
- Open the base slot and press the cable fully into the channel along its length.
- Cut square ends with a sharp knife so the cover sits neatly at each end.
Complete your project
- Hazard Warning Cable Protector – 68mm x 15mm – Per Length
- Low Profile Cable Protector – 83mm x 14mm NR/SBR – Per Length
- Rubber Cable Protector – 127mm x 28mm, 23mm Hole – 4.5m or 9m Length
Questions
What size cable fits the channel?
The channel is 14mm wide by 8mm high, which suits most single power, data, phone and monitor leads.
Can wheelchairs cross it?
Yes. At only 11mm high with tapered sides, wheelchairs, trolleys and pedestrians pass over it easily.
Is it for vehicle traffic?
No. This slim cable cover is for foot traffic in offices and interiors. For forklifts and site vehicles choose an industrial cable protector such as the 127mm x 28mm.
Can I cut it to length?
Yes. The rubber cuts cleanly with a sharp knife, so a longer length can be trimmed or split.
Which colour should I choose?
Black suits dark carpets and industrial floors, grey suits vinyl and concrete, and beige blends with lighter carpets and timber-effect floors.
Not sure which cable cover suits your floor? Contact our team and we will help you choose.
Product details
| SKU | IP-LPCP-68X11-1M-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Low Profile Cable Protector – 68mm x 11mm, Single Channel – Per Length