
Rubber & FoamSKU IP-EPDM-23.5X9-12
EPDM P Profile Seal – 23.5mm Tail x 9mm Bulb – Cut Length
Price shown updates with the option you pick.
This EPDM P profile seal 23.5mm x 9mm has a flat 23.5mm tail and a 9mm hollow bulb, made to form a reliable weather-resistant seal on doors, hatches, windows and enclosures. The hollow bulb compresses easily to close gaps, while the flat tail gives a secure surface for adhesive or mechanical fixing. It is sold as one continuous length, from 12m up to a full 30m coil.
At a glance
- 9mm diameter hollow sealing bulb with a thin wall for easy compression
- 23.5mm flat tail section, 2.5mm thick
- Solid EPDM rubber, 65-75 Shore A
- Excellent UV and weathering resistance for door and hatch seals
- Suitable for interior and exterior use
- Operating temperature range of -40°C to 90°C
Typical uses
- Door and window weather seals
- Automotive and transport body seals
- Marine hatch and locker lid weatherproofing
- Impact absorption and decorative edge trim
- Industrial and commercial cabinet and enclosure doors
Which one do I need?
| P seal size | Best for |
| 19.5mm tail x 7.5mm bulb | Smaller gaps, lighter doors and lids |
| 23.5mm tail x 9mm bulb (this item) | Medium gaps on cabinet doors, hatches and windows |
| 26.5mm tail x 11mm bulb | Larger gaps and heavier doors |
| 31.67mm tail x 12.5mm bulb | Wide gaps and uneven frames |
As a guide, pick a bulb roughly a quarter larger than the gap it must close, so it compresses without being crushed flat.
Technical drawing
Specification
| Material | Solid EPDM |
| Colour | Black |
| Tail width | 23.5mm |
| Tail thickness | 2.5mm |
| Bulb diameter | 9mm, hollow |
| Hardness | 65° – 75° Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Compression set | 21% (70°C for 22hrs) |
| Temperature range | -40°C to 90°C |
| Weight | 0.1kg per metre |
| Unit of sale | One continuous length, 12m to 30m |
How much do I need?
Measure the full perimeter you need to seal and choose the next length up. A door opening 2m high and 1m wide has a 6m perimeter, so a 12m length seals two identical doors. The minimum length is 12m; the 30m option is a full coil and works out cheaper per metre.
Fitting tips
- Clean and degrease the mounting surface thoroughly before fitting.
- Make sure the tail is fully supported by the frame along its whole width.
- Use a suitable contact adhesive or mechanical fixings through the tail.
- Do not stretch the seal while fitting, as it will shrink back over time.
- Cut with sharp secateurs or a craft knife for a clean, square end.
Complete your project
- EPDM P Profile Seal – 19.5mm Tail x 7.5mm Bulb – Cut Lengths
- EPDM P Profile Seal – 26.5mm Tail x 11mm Bulb – Cut Length
- EPDM P Profile Seal – 31.67mm Tail x 12.5mm Bulb – Per Metre
Questions
Can this P seal be used outdoors?
Yes. EPDM rubber has excellent resistance to UV light and weathering, so it suits exterior doors, hatches and windows.
How do I fix this seal in place?
Secure the flat tail with a suitable contact adhesive or with mechanical fixings such as screws or rivets.
Will the hollow bulb compress completely flat?
The thin-walled hollow bulb compresses easily, but it should not be crushed fully flat in normal use or it will wear sooner.
Is this rubber door seal suitable for marine use?
Yes. EPDM resists water and weathering well, which makes it a common choice for boat hatch and locker seals.
Why is the 30m length cheaper than 29m?
30m is a full uncut coil, so it avoids the cutting cost of a part coil.
Need advice on choosing the right seal? Contact our team for help.
Product details
| SKU | IP-EPDM-23.5X9-12 |
|---|---|
| Weight | 2.65 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM P Profile Seal – 23.5mm Tail x 9mm Bulb – Cut Length