
Rubber & FoamSKU IP-EPDMP-70X40-STD
EPDM P Profile Seal – 70mm Tail x 40mm Bulb – 4m Length
This black EPDM P profile seal features a large 40mm hollow bulb and a long 70mm flat tail, providing a heavy-duty compression seal for doors, windows and hatches. Manufactured from solid EPDM rubber, it is highly resistant to weathering, UV exposure and ozone, making it suitable for both interior and exterior environments. The hollow bead design allows for superior compression, absorbing impacts and creating a reliable weather-resistant barrier. It is supplied as a 4m length.
At a glance
- Solid EPDM rubber construction
- 40mm diameter hollow sealing bulb
- 70mm flat tail for secure mounting
- Excellent UV and weathering resistance
- Operating temperature range of -40°C to 90°C
- Supplied in 4m lengths
Typical uses
- Heavy-duty door and window seals
- Marine and transportation weatherproofing
- Automotive hatch and compartment sealing
- Industrial enclosure seals
- Impact absorption and decorative trim
Technical drawing
Specification
| Material | Solid EPDM |
| Colour | Black |
| Bulb Diameter | 40mm |
| Tail Length | 70mm |
| Wall Thickness | 6mm |
| Hardness | 65° - 75° Shore A |
| Tensile Strength | 10 MPa |
| Elongation at Break | 500% |
| Compression Set (70°C for 22hrs) | 21% |
| Temperature Range | -40°C to 90°C |
| Length | 4m |
Installation and care
This EPDM P profile seal can be installed using a suitable rubber adhesive or by mechanical fixing through the flat tail. Ensure the mounting surface is clean, dry and free from grease before applying adhesive. The rubber can be easily cut to the required length using sharp shears or a utility knife.
Fitting tips
- Clean the mounting surface thoroughly with a suitable solvent before bonding.
- If using adhesive, apply an even coat to both the tail of the seal and the mounting surface for the strongest bond.
- For mechanical fixing, use a backing strip or washers to prevent the fixings from pulling through the rubber tail.
- Avoid stretching the seal during installation, as it will shrink back over time and may pull away from the corners.
Complete your project
- Silicone Round U Channel – 6.5mm x 8mm, 2.5mm Slot 6mm Deep, 60 Shore A – for 2.5mm Edges – 25m Coil
- Silicone Round U Channel – 6.5mm x 8mm, 2mm Slot 4mm Deep, 70 Shore A – for 2mm Edges – 25m Coil
- Silicone L Profile – 6.2mm x 5.2mm – 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Can this seal be used outdoors?
Yes, the solid EPDM rubber construction provides excellent resistance to UV light, ozone and general weathering, making it ideal for exterior applications.
How do I fix the seal in place?
The 70mm flat tail provides a large surface area for bonding with a suitable contact adhesive, or it can be mechanically fastened using screws or rivets.
Is the bulb solid or hollow?
The 40mm bulb is hollow, which allows it to compress easily and form a tight seal against uneven surfaces.
Can I cut the seal to size?
Yes, the EPDM rubber can be easily cut to your exact requirements using a sharp utility knife or heavy-duty shears.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-EPDMP-70X40-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM P Profile Seal – 70mm Tail x 40mm Bulb – 4m Length