
Rubber & FoamSKU IP-EPDMB-60X32-STD
EPDM Rubber B Fender – 60mm x 32mm – 12m Roll
This EPDM rubber B fender 60mm x 32mm is a solid black impact strip with twin rounded lobes, used to protect pontoon edges, loading bay walls, vehicle bodies and warehouse fixtures. It is sold as one continuous 12m roll.
At a glance
- EPDM rubber B fender profile, 60mm wide x 32mm high
- Solid section with a central slot between twin rounded lobes
- 70 Shore A - firm enough to hold its shape, soft enough to absorb knocks
- Good UV, ozone and weather resistance for outdoor rubbing strip use
- Heavy section at 2.47kg per metre
- Supplied as one 12m roll, cut to length on site
Typical uses
- Rubbing strip along boat and pontoon edges
- Wall and kerb protection in loading bays and factories
- Bump strip on ambulances, trucks and commercial vehicles
- Impact protection for shopfitting and warehouse fixtures
Which one do I need?
| Profile | Best for |
| 44mm x 19mm EPDM B fender | Lighter rubbing strip for small craft, trailers and fixtures |
| 60mm x 32mm EPDM B fender (this item) | General heavy-duty protection where a deep, solid section is needed |
| 60mm x 32mm with stainless steel strip | Same section with a stainless wearing face for harder, abrasive contact |
| 76mm x 32mm EPDM B fender | Wider face for larger vessels, docks and vehicle sides |
Technical drawing
Specification
| Material | EPDM rubber |
| Profile | B fender (twin lobe, central slot) |
| Size | 60mm wide x 32mm high |
| Unit of sale | One 12m roll |
| Colour | Black |
| Hardness | 70 Shore A |
| Weight | 2.47kg per metre |
| Density | 1.28 g/cm³ |
| Tensile strength | 7.2 MPa |
| Elongation at break | 305% |
| Tear strength | 55 N/mm |
| Compression set (24h at 100°C, 25%) | 23% |
| Rebound resilience | 23% |
| Ozone resistance (72h at 40°C, 50pphm) | No cracking |
How much do I need?
Measure the total run of edge to protect and add a little for trimming. For example, a 10m pontoon side plus a 1.5m return end needs 11.5m, so one 12m roll covers it with 0.5m spare. Longer runs need a second roll, butted end to end.
Fitting tips
- Fix through the central slot so the fixing heads sit below the lobes and away from the contact face.
- Space fixings evenly, closer together at ends and corners where the strip takes the most load.
- Use stainless or galvanised fixings suited to the backing - timber, steel, GRP or concrete.
- Let the roll relax at room temperature before fitting so it lies straight.
- Cut square with a sharp blade for a neat butt joint between lengths.
Complete your project
- EPDM Rubber B Fender 60mm x 32mm with Stainless Steel Strip
- EPDM Rubber B Fender 76mm x 32mm - 12m Roll
- EPDM Rubber B Fender 44mm x 19mm - 30m Roll
Questions
Can this rubber fender strip be used outdoors?
Yes. EPDM has good resistance to UV, ozone and weathering, so it suits pontoons, quaysides and loading bays as well as indoor use.
How is the B fender supplied?
As one continuous 12m roll. You cut it to the lengths you need on site.
How do I fix it?
Mechanically, through the central slot between the lobes, using fixings suited to the surface behind.
What is the difference from the version with a stainless steel strip?
The section is the same 60mm x 32mm; the other version adds a stainless wearing face for abrasive contact. This plain version is lighter and simpler to fit.
Is it rigid or flexible?
At 70 Shore A it is firm and holds its shape on a straight run, but flexes under impact to absorb the load.
Need help choosing the right fender? Contact our team for advice.
Product details
| SKU | IP-EPDMB-60X32-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Rubber B Fender – 60mm x 32mm – 12m Roll