
Rubber & FoamSKU IP-EPDMB-44X19-STD
EPDM Rubber B Fender – 44mm x 19mm – 30m Roll
This EPDM rubber B fender 44mm x 19mm is a medium-size bump and rubbing strip that takes repeated knocks on loading bay walls, commercial vehicle bodies, ambulances, boats and shopfittings. It is sold as one continuous 30m roll, with a flat back for fixing and a double-rounded B face that spreads each impact.
At a glance
- B profile, 44mm wide x 19mm deep
- Solid EPDM rubber, 70° Shore A
- Excellent UV, weather and ozone resistance (no cracking after 72h at 40°C, 50pphm)
- Tough: 7.2 MPa tensile strength, 55 N/mm tear strength
- Suitable for indoor and outdoor use
- About 0.92kg per metre
- Supplied as a 30m roll
Typical uses
- Rubbing strip along loading bay walls and factory walls
- Body protection on trucks, vans and ambulances
- Light marine fendering on boats and pontoons
- Bump strip on shopfitting counters and display units
Which one do I need?
| B fender | Size (W x D) | Material | Best for |
|---|---|---|---|
| Neoprene B fender | 38mm x 13mm | Neoprene | Light, low-profile trim |
| EPDM B fender (this item) | 44mm x 19mm | EPDM, 70 Shore A | Vehicles, bays and walls outdoors |
| TPE B fender | 45mm x 25mm | TPE | Deeper cushioning, recyclable |
| TPE B fender, solid | 80mm x 40mm | TPE | Heavy impacts on docks and bays |
Technical drawing
Specification
| Profile | B fender |
| Size | 44mm wide x 19mm deep |
| Material | EPDM rubber |
| Hardness | 70° Shore A |
| Colour | Black |
| Tensile strength | 7.2 MPa |
| Elongation at break | 305% |
| Tear strength | 55 N/mm |
| Compression set | 23% (24h at 100°C, 25% compression) |
| Density | 1.28 g/cm³ |
| Rebound resilience | 23% |
| Ozone resistance | No cracking, 72h at 40°C, 50pphm |
| Weight | 0.92kg per metre |
| Unit of sale | 30m roll |
How much do I need?
Measure every run you want to protect and add about 5% for trimming. Example: two rubbing strips along both sides of a 4.2m long van body need 2 x 2 x 4.2m = 16.8m, plus 5% = about 17.6m, so a 30m roll covers that van and leaves about 12m spare; a loading bay with three 3m wall runs needs about 9.5m, so one roll protects three bays.
Fitting tips
- Fix mechanically through the flat back with fasteners spaced evenly along the length, closer together at the ends.
- Clean and flatten the mounting surface before fitting so the back sits fully in contact.
- Let the roll relax at room temperature before cutting so the strip lies straight.
- Cut square with a sharp blade; butt joints should be tight to stop water and dirt collecting.
- On vehicles, run the strip at the height where trolleys, pallets or posts actually make contact.
Complete your project
- Neoprene Rubber B Fender – 38mm x 13mm – 36.57m Coil
- TPE B Fender – Black – 45mm x 25mm – 25m Coil
- TPE B Fender – Solid 80mm x 40mm, Non-Marking – 25m Coil
Questions
Can the 44mm x 19mm EPDM B fender be used outdoors?
Yes. EPDM has excellent resistance to UV, weathering and ozone, so it suits exterior walls, vehicles and marine use.
How is it fixed?
It is designed to be mechanically fixed through the flat back using suitable fasteners for the surface you are fixing to.
How hard is the rubber?
It is 70° Shore A: firm enough to resist tearing and abrasion while still absorbing knocks.
How long is the roll?
It is supplied as one continuous 30m roll that you cut to the lengths you need.
Not sure which size you need? Contact our team and we will help you choose.
Product details
| SKU | IP-EPDMB-44X19-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Rubber B Fender – 44mm x 19mm – 30m Roll