
Rubber & FoamSKU IP-RCDS-25.5X14.5X6-STD
EPDM Self-Grip Door Seal – 25.5mm x 14.5mm for 6mm Panels – Per Metre
This heavy-duty EPDM self-grip door seal measures 25.5mm x 14.5mm and is designed specifically to fit 6mm thick panel edges. Combining a rigid solid rubber U-channel with a flexible sponge rubber sealing bulb, it provides a reliable, weather-proof barrier against moisture, drafts, and noise. It is sold per metre, with a minimum order of 7m and a full coil length of 25m.
At a glance
- Fits 6mm panel edges securely
- 25.5mm x 14.5mm overall profile
- Dual-density EPDM construction (solid U-channel, sponge bulb)
- Integrated steel wire carrier for a strong mechanical grip
- No adhesives required for installation
- Operating temperature range of -40°C to +80°C
Typical uses
- Sealing commercial and domestic garage doors
- Weather-proofing vehicle doors, bus hatches, and transit enclosures
- Creating waterproof boundaries on marine storage and boat hatches
- Insulating industrial sheet metal enclosures and safety barriers
Technical drawing
Specification
| Material | Solid and sponge EPDM with steel wire carrier |
| Profile size | 25.5mm x 14.5mm |
| To fit panel thickness | 6mm |
| Hardness (U-Clip) | 80° Shore A |
| Operating temperature | -40°C to +80°C |
| Colour | Black |
How much do I need?
This seal is sold per metre. To calculate your requirement, measure the total perimeter of the door or panel edge you need to seal. For example, if your enclosure door has a perimeter of 8.5m, you should order 9m to ensure you have enough material to complete the job and allow for neat trimming.
Fitting tips
- Thoroughly clean the panel edge to remove any grease, dirt, or debris before fitting.
- Measure and cut the seal to the required length using a sharp utility knife or heavy-duty shears.
- Push the U-clip section firmly onto the 6mm edge by hand.
- If necessary, use a rubber mallet to gently tap the seal fully into place without damaging the rubber.
Complete your project
- EPDM Self-Grip Door Seal – 25.5mm x 18.1mm – Per Metre
- EPDM Sponge Boot Seal – 12mm x 17mm – Adhesive Backed – 10m to 50m Lengths
- Self-Grip Door Seal – 32mm x 15.5mm – Per Metre
Data sheet
Download the technical data sheet (PDF)
Questions
Do I need glue to fit this seal?
No, the integrated steel wire carrier provides a strong, self-gripping mechanical hold on 6mm panels, eliminating the need for adhesives.
Can this be used outdoors?
Yes, the EPDM material offers excellent resistance to UV, ozone, heavy rain, and extreme temperatures (-40°C to +80°C).
What is the minimum amount I can buy?
The minimum order quantity for this profile is 7 metres.
Is the bulb section solid or hollow?
The sealing bulb is made from a flexible sponge EPDM, which compresses easily to form a tight seal against mating surfaces.
If you need further assistance choosing the right profile, please contact our team.
Product details
| SKU | IP-RCDS-25.5X14.5X6-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Self-Grip Door Seal – 25.5mm x 14.5mm for 6mm Panels – Per Metre