
Rubber & FoamSKU IP-IPSTS-10X25X1.6-9
EPDM Self-Grip Top Seal – 10mm x 25mm for 1.6mm to 3mm Panels – 9m to 25m Lengths
Price shown updates with the option you pick.
This EPDM self-grip top seal 10mm x 25mm pushes onto 1.6mm to 3mm panel edges and seals against a closing door, hatch or lid with its flexible sponge lip. Sold as one continuous length from 9m to 25m: choose the length you need from the options.
At a glance
- EPDM top seal, 10mm wide and 25mm high overall
- Grips 1.6mm to 3mm panels with no glue or fixings
- Solid EPDM grip base with steel wire carrier and internal gripping teeth
- Curved sponge EPDM sealing lip on top
- Weather, UV and ozone resistant; -40°C to +80°C
- One continuous length, 9m to 25m
Typical uses
- Waterproofing hatches and lockers on marine and plant equipment
- Door seals on commercial vehicles, trailers and kiosks
- Side window and panel seals on buses and rail vehicles
- Edge sealing and protection on electrical and industrial enclosures
Which one do I need?
| Self-grip top seal | Choose it when |
| 9.5mm x 18mm | The gap to close is small and space above the edge is tight |
| 10mm x 25mm (this item) | You need a taller 25mm seal on 1.6-3mm sheet with a lip that wipes against the closing face |
| 12mm x 21mm | You want a wider grip base on similar sheet thicknesses |
| 15mm x 30.5mm | The gap is larger and needs more seal height |
Technical drawing
Specification
| Product | EPDM self-grip top seal |
| Profile size | 10mm wide x 25mm high |
| Panel grip range | 1.6mm to 3mm |
| Material | Solid EPDM grip base, sponge EPDM lip, steel wire carrier |
| Hardness | 67 to 82 Shore |
| Temperature range | -40°C to +80°C |
| Maximum compression | 40% |
| Colour | Black |
| Unit of sale | One continuous length, 9m to 25m |
How much do I need?
Add up every edge to be sealed and allow about 5% for corners and trimming. Example: a hatch opening 1.2m x 0.8m has a perimeter of 4.0m, so 4.2m with allowance; three such hatches need 12.6m, so order the 13m length. The full 25m coil is priced lower than the 20m to 24m lengths, so pick it if you need more than about 19m.
Fitting tips
- Start at a straight section and press the grip base onto the edge by hand; tap with a rubber mallet to seat it fully.
- Set the lip so it is compressed 30-40% when the door or hatch is closed; over 50% will permanently deform it.
- On corners, ease the seal round rather than cutting it, so the wire carrier keeps its grip.
- Cut through the steel carrier with heavy-duty snips and leave a tight butt joint at the ends.
Complete your project
- EPDM Self-Grip Top Seal – 12mm x 21mm
- EPDM Self-Grip Top Seal – 9.5mm x 18mm
- EPDM Self-Grip Top Seal – 15mm x 30.5mm
Questions
Do I need glue to fit this top seal?
No. The steel-reinforced grip base and internal teeth hold it on 1.6mm to 3mm panels without adhesive.
Can it go round corners?
Yes. The flexible EPDM and wire carrier bend round curves and corners while keeping their grip.
Is it suitable outdoors?
Yes. EPDM resists weather, UV and ozone and stays flexible from -40°C to +80°C.
Is it one piece or several?
Each length you choose is supplied as one continuous piece, so there are no joints to seal along the run.
Why is 25m cheaper than 24m?
25m is the full manufactured coil; shorter lengths are cut from a coil, which costs more to handle.
Need help choosing a seal? Contact our team for advice.
Product details
| SKU | IP-IPSTS-10X25X1.6-9 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Self-Grip Top Seal – 10mm x 25mm for 1.6mm to 3mm Panels – 9m to 25m Lengths