
Rubber & FoamSKU IP-IPSGT-14X32X0.5-STD
EPDM Self-Grip Top Seal – 14mm x 32mm – Fits 0.5mm to 1.5mm Panels – Per Metre
This 14mm x 32mm EPDM self-grip top seal provides a durable, watertight closure for doors, hatches, and enclosures. Designed to push securely onto 0.5mm to 1.5mm thick panel edges, it combines a solid rubber U-channel base with a flexible sponge rubber sealing bulb on top. The base features an internal steel wire carrier and rubber gripping fins, ensuring a permanent mechanical hold without the need for adhesives or fixings. It is priced per metre and supplied in continuous lengths (minimum order 10m, up to 50m per coil).
At a glance
- 14mm wide x 32mm high overall profile
- Fits 0.5mm to 1.5mm sheet metal, glass, or plastic edges
- Steel-reinforced solid EPDM base with internal gripping fins
- Flexible EPDM sponge top bulb for effective compression sealing
- Excellent resistance to UV, ozone, weathering, and common chemicals
- Priced per metre (minimum order 10m)
Typical uses
- Sealing doors, hatches, and lockers on commercial vehicles and marine equipment
- Weatherproofing enclosures, cabinets, and roof panels
- Providing a watertight seal on classic cars, caravans, buses, and trains
- Edge protection and sealing for glass and sheet metal panels
Technical drawing
Specification
| Material | Solid EPDM base, sponge EPDM bulb, steel wire carrier |
| Overall size (W x H) | 14mm x 32mm |
| Panel thickness range | 0.5mm to 1.5mm |
| Hardness | 70° Shore A (solid section) |
| Operating temperature | -40°C to +70°C |
| Maximum compression | 40% (sponge section) |
| Weight | 0.175kg per metre |
| Colour | Black |
How much do I need?
This seal is priced per metre. To calculate your requirement, measure the total perimeter of the door, hatch, or panel edge you need to seal. For example, a hatch measuring 1.2m by 0.8m has a perimeter of 4m. We recommend adding 5-10% to allow for corner trimming and exact fitting. Please note the minimum order quantity is 10m. Orders are supplied as a single continuous length up to a maximum of 50m per coil.
Fitting tips
- Ensure the panel edge is clean, dry, and free from sharp burrs before fitting.
- Push the seal firmly onto the edge by hand, or tap it gently into place using a rubber or thermoplastic mallet.
- Do not stretch the seal as you fit it; push it together slightly to prevent it shrinking back over time.
- Cut the seal to your exact length using heavy-duty shears or snips, taking care to cut cleanly through the steel carrier.
- For optimum performance and recovery, ensure the sponge bulb is compressed by 30% to 40% when the door or hatch is closed (do not exceed 40% compression).
Complete your project
- EPDM Self-Grip Top Seal – 11mm x 16mm – 10m to 50m Coil
- EPDM Self-Grip Top Seal – 11.1mm x 29.5mm – 10m to 50m Coil
- Silicone L Profile – 51mm x 26mm, 6.3mm Wall – 10m or 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Do I need adhesive to fit this seal?
No. The internal steel wire carrier and rubber fins grip the panel edge securely, providing a strong mechanical hold without glue.
Can it bend around corners?
Yes, the profile is highly flexible and will follow radii and corners on doors and hatches. For very tight 90-degree corners, you may need to notch the base slightly.
Is it suitable for outdoor use?
Yes. EPDM rubber offers excellent resistance to UV, ozone, and weathering, making it ideal for exterior vehicle, marine, and enclosure applications.
What happens if I compress the seal too much?
If the sponge bulb is compressed beyond the recommended 40% maximum, it may suffer from compression set (permanent deformation) and lose its ability to spring back and maintain a watertight seal.
Need further assistance? Contact our team for help.
Product details
| SKU | IP-IPSGT-14X32X0.5-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Self-Grip Top Seal – 14mm x 32mm – Fits 0.5mm to 1.5mm Panels – Per Metre