
Rubber & FoamSKU IP-SGTS-11X21.5-FR-10M
Fire-Rated EPDM Self-Grip Top Seal – 11mm x 21.5mm – EN 45545-2 HL2 – 1mm to 2mm Panels – 10m to 50m
Price shown updates with the option you pick.
A push-on edge seal for 1 mm to 2 mm panels, made from an EPDM compound that the manufacturer states meets the rail fire standard EN 45545-2:2020 (requirement sets R22 and R23, Hazard Level HL2). The lower half is a solid EPDM U-grip with a steel carrier, one angled lip and three fins inside, so it clamps onto doors, hatches, side panels and window frames with no glue or fixings. The upper half is a round, closed-cell sponge EPDM bulb with two small sealing lips, which squeezes against the closing door or lid to keep out water, draughts and dust.
Overall size is 11 mm wide × 21.5 mm high, black, 0.16 kg per metre. Choose any single continuous length from 10 m to 49 m, or a 50 m full coil. Held in UK stock.
At a glance
- Fire rating: EN 45545-2:2020, R22/R23, HL2 (manufacturer's statement for the EPDM compound)
- Fits: 1 mm to 2 mm panel edges, flat or curved
- Size: 11 mm W × 21.5 mm H; sponge bulb 8.4 mm, grip 13.1 mm
- Grip: U-shaped steel carrier plus 1 angled lip and 3 fins, no adhesive needed
- Seal: closed-cell sponge EPDM bulb, best at 30–40 % compression
- Temperature: −40 °C to +70 °C for the complete seal
- Supplied: one unbroken length, 10 m to 49 m, or a 50 m coil
Technical drawing

Specifications
| Property | Value | Test method / source |
|---|---|---|
| Profile dimensions | ||
| Overall width (across bulb lips) | 11 mm | Manufacturer's drawing |
| Overall height | 21.5 mm (± 1.6 mm) | Manufacturer's drawing |
| Sponge bulb section height | 8.4 mm | Manufacturer's drawing |
| Grip section height | 13.1 mm | Manufacturer's drawing |
| Top of seal to grip shoulder | 10.7 mm (± 1.3 mm) | Manufacturer's drawing |
| Grip straight side wall | 10.8 mm | Manufacturer's drawing |
| Grip base width | 9.4 mm | Manufacturer's drawing |
| Mouth opening | 4.8 mm | Manufacturer's drawing |
| Panel / edge thickness it fits | 1 mm to 2 mm | Manufacturer |
| Weight | 0.16 kg per metre | Manufacturer |
| Colour | Black | Manufacturer |
| Lengths | 10 m to 49 m continuous, or 50 m full coil | — |
| Solid EPDM grip section | ||
| Hardness | 70 ± 5 Shore A | TS ISO 7619-1 |
| Tensile strength | 7.5 MPa | TS ISO 37 |
| Elongation at break | 300 % | TS ISO 37 |
| Tear resistance | 8 N/mm | TS 4698 ISO 34-1 |
| Compression set (22 h at 100 °C) | 34 % | TS 4595 ISO 815 |
| Ozone resistance (72 h at 40 °C, 50 pphm) | No cracking | TS 2680 (ISO 1431-1 A) |
| UV resistance (anti-yellowing) | No migration | ASTM D1148 |
| Brittleness point (24 h at −40 °C) | No cracking | TS 3047 ISO 812 |
| Flame resistance | Meets EN 45545-2 (R22/R23, HL2) | EN 45545-2 |
| Working temperature (solid EPDM) | −40 °C to +120 °C | Manufacturer's datasheet |
| Sponge EPDM bulb | ||
| Compound | Closed-cell EPDM sponge | — |
| Density | 0.6 g/cm³ (600 kg/m³) | TS 2817 ISO 2781 |
| Tensile strength | 2.8 MPa | TS ISO 37 |
| Elongation at break | 140 % | TS ISO 37 |
| Compression deflection | 42 kPa | ASTM D1056 |
| Water absorption | 0.98 % | ASTM D1056 |
| Ozone resistance (72 h at 40 °C, 50 pphm) | No cracking | ISO 1431-1 A |
| Thermal conductivity | 0.15 W/m·K | ASTM C518 |
| Recovery after ageing | 82 % | Manufacturer's datasheet |
| Working temperature (sponge) | −40 °C to +70 °C | Manufacturer's datasheet |
| Complete seal in use | ||
| Service temperature | −40 °C to +70 °C (limited by the sponge bulb) | Manufacturer |
| Bulb compression | 30–40 % ideal; 40 % maximum recommended; never above 50 % | Manufacturer |
| Steel carrier | U-shaped steel insert, full length | Manufacturer |
Test-method codes are shown as the manufacturer lists them (TS = Turkish Standards equivalent of the ISO method). Values are the manufacturer's typical figures, not a guarantee for every batch.
Materials and compliance
- EN 45545-2:2020, R22/R23, HL2: the manufacturer states that the EPDM compound used in this seal meets these railway-vehicle fire requirements, and its datasheet lists the flame-resistance test as EN 45545-2. (The supplier's page writes the standard as "EN 45542-2"; the datasheet and the R22/R23/HL2 references make clear it is EN 45545-2.)
- The datasheet places the flame result in the solid-EPDM table. If your project file needs the test report or a certificate covering the sponge bulb as well, email us before ordering and we will request it from the manufacturer.
- No other approvals (such as REACH, RoHS, food-contact or UL 94) are stated for this product, so we do not claim them.
How it fits

- Check the edge is 1–2 mm thick, clean and free of burrs.
- Start at the bottom or at a hidden point. Push the grip onto the edge by hand, or tap it on with a rubber or plastic mallet.
- Work round corners without stretching the seal. The steel carrier lets it follow curves and bends.
- Cut to length with sharp snips or side cutters, because there is steel inside, and butt the two ends tightly together.
- Set the door or lid so it squeezes the bulb by 30–40 %. With an 8.4 mm bulb, that is a gap of roughly 5–6 mm between the closing face and the top of the grip.
Choosing your length
Every length is supplied as one unbroken piece. Measure the full perimeter you need to seal and add a little for trimming. From 10 m to 49 m the price is £17.01 per metre inc VAT. The 50 m full coil is priced at our coil rate (£11.34 per metre), so from 34 m upwards the 50 m coil costs less than a cut length. If you need more than 50 m, or several shorter pieces, contact us for a quote.
Typical uses
- Rail vehicle interior doors, access hatches, side panels and window surrounds where EN 45545-2 materials are specified
- Buses, coaches and other public-service vehicle panels
- Equipment cabinets, enclosures and machine-guard doors
- Caravan, motorhome, marine and classic-car door and hatch edges
Frequently asked questions
Do I need glue or fixings?
No. The steel carrier, the angled lip and the three internal fins grip the edge on their own, and no special fitting tools are required.
Will it fit my panel?
It is made for edges 1 mm to 2 mm thick. Below 1 mm it may not grip firmly; above 2 mm it will be hard to push on and the grip can split. For other thicknesses, ask us for a matching self-grip seal.
Is the whole seal fire-rated?
The manufacturer states that the EPDM compound meets EN 45545-2:2020, R22/R23, HL2. Its datasheet reports the flame test in the solid-EPDM table. If you need documentation covering every part of the seal for a vehicle file, contact us and we will request the test report.
What temperatures can it handle?
The complete seal is rated −40 °C to +70 °C. The solid grip alone is rated to +120 °C, but the sponge bulb limits the seal to 70 °C.
How much should the bulb be squeezed?
Aim for 30–40 % compression and never more than 50 %. Over-compressing the sponge stops it recovering and shortens its sealing life.
How do I cut and join it?
Use sharp snips or side cutters, as there is a steel carrier inside. Make a clean square cut and push the two ends tightly together. For corners, bend the seal round rather than cutting and mitring it.
Can it go round corners?
Yes. The steel carrier lets it follow curves and bends. On very tight corners, ease the seal round gradually so the grip stays fully seated.
Is it suitable outdoors?
Yes. Both EPDM parts are listed as resisting ozone without cracking, and the solid part passes UV and low-temperature brittleness tests. EPDM is not recommended for prolonged contact with oils or fuels.
Why is the 50 m coil cheaper than some shorter lengths?
Full coils are bought at a lower rate, and we pass that on. From 34 m upwards it is cheaper to buy the coil and keep the spare.
Complete your project
- Fire-Rated EPDM Self-Grip Edge Trim – 7.4 x 9.7 mm – EN 45545-2
- Fire-Rated EPDM L Profile – 10 x 14 mm – EN 45545-2 HL2
- EPDM Self-Grip Top Seal – 9 x 20.5 mm – 1 mm to 2 mm panels (standard grade)
- Silicone Self-Grip Top Seal – 11 x 21.6 mm – for higher temperatures
Need help choosing, a certificate request, or a quantity quote? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SGTS-11X21.5-FR-10M |
|---|---|
| Weight | 3.53 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Fire-Rated EPDM Self-Grip Top Seal – 11mm x 21.5mm – EN 45545-2 HL2 – 1mm to 2mm Panels – 10m to 50m