
Rubber & FoamSKU IP-EPDMET-FR-7.4X9.7-20M
Fire-Rated EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – EN 45545-2 – 1mm to 2mm Panels – 20m to 75m
Price shown updates with the option you pick.
A flame-retardant black EPDM rubber edge trim for 1 mm to 2 mm panel edges, made from a compound the manufacturer states conforms to EN 45545-2 (requirement sets R22 and R23, hazard level HL2) for railway vehicles. The profile is 7.4 mm wide and 9.7 mm high. A U-shaped steel wire runs inside the rubber for the full length and keeps the jaws clamped, while two angled fins inside the 3.6 mm mouth fold against both faces of the panel, so it holds with no glue. It is rated for −40 °C to +120 °C and resists ozone and UV. Choose any continuous length from 20 m to 74 m, or a full 75 m coil. It is in stock in the UK for same-day dispatch.
At a glance
- Fire performance: EPDM compound stated by the manufacturer to EN 45545-2:2020, R22 / R23, HL2
- Fits: sheet metal, glass, plastic, fibreglass and board edges 1 mm to 2 mm thick
- Size: 7.4 mm wide × 9.7 mm high; 3.6 mm mouth; 7.8 mm inner depth
- Construction: flame-retardant EPDM, 70° ±5 Shore A, moulded over a U-shaped steel wire carrier
- Working temperature: −40 °C to +120 °C
- Weight: 0.07 kg per metre
- Price: £15.00 per metre inc VAT for 20 m to 49 m; £13.50 per metre for 50 m and over (75 m coil £1,012.50)
No fire rating needed? The same profile in standard EPDM costs much less: EPDM Self-Grip Edge Trim 7.4 × 9.7 mm.
Technical drawing

All dimensions are in mm and nominal. The drawing is not to scale. The carrier and fin shapes are shown as typical.
Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile | Self-gripping U edge trim with steel wire carrier and twin internal gripping fins | Manufacturer drawing |
| Overall width | 7.4 mm | Manufacturer drawing and data sheet |
| Overall height | 9.7 mm | Manufacturer drawing and data sheet |
| Mouth opening (unflexed, between the feet) | 3.6 mm | Manufacturer drawing |
| Inner depth (mouth to inside of crown) | 7.8 mm | Manufacturer drawing |
| Crown thickness | 1.9 mm | Calculated: 9.7 − 7.8 |
| Side wall each side of the mouth | 1.9 mm | Calculated: (7.4 − 3.6) ÷ 2 |
| Panel thickness it fits | 1 mm to 2 mm | Manufacturer product data |
| Material | Flame-retardant solid EPDM (ethylene propylene diene monomer) rubber | Manufacturer data sheet |
| Carrier | Steel wire, U-shaped, full length | Manufacturer |
| Colour | Black | Manufacturer |
| Fire performance | Compound stated to conform to EN 45545-2:2020, requirement sets R22 / R23, hazard level HL2 | Manufacturer statement |
| Flame resistance | Manufacturer result: “non-flammable” (no further figures published) | EN 45545-2 |
| Hardness | 70° ±5 Shore A | TS ISO 7619-1 |
| Tensile strength | ≥ 7.5 MPa | TS ISO 37 |
| Elongation at break | ≥ 300 % | TS ISO 37 |
| Tear resistance | ≥ 8 N/mm | TS 4698 / ISO 34-1 |
| Compression set (22 h at 100 °C) | 34 % | TS 4595 / ISO 815 |
| Ozone resistance (72 h at 40 °C, 50 pphm) | No cracking | TS 2680 / ISO 1431-1, method A |
| UV resistance (anti-yellowing) | No migration | ASTM D1148 |
| Brittleness (24 h at −40 °C) | No cracking | TS 3047 / ISO 812 |
| Minimum working temperature | −40 °C | Manufacturer data |
| Maximum working temperature | +120 °C | Manufacturer data |
| Weight | 0.07 kg per metre | Manufacturer data |
| Density | Not stated for this profile | Ask us if you need it |
| Dimensional tolerance | Not stated; dimensions are nominal | Ask us if you need it |
| Supplied as | One continuous length, 20 m to 74 m, or a full 75 m coil | — |
| Price | £15.00/m inc VAT (20–49 m); £13.50/m inc VAT (50–75 m) | — |
Materials and compliance
The trim is a flame-retardant EPDM rubber moulded over a steel wire carrier. The manufacturer states in its product text that this EPDM compound conforms to EN 45545-2:2020, requirement sets R22 and R23, hazard level HL2, for use in railway vehicles, and its data sheet lists flame resistance tested to EN 45545-2. The manufacturer's page also prints the standard as “EN 45542-2” in places; we read this as a typo for EN 45545-2, which is the rail fire-safety standard named in its data sheet. We have not seen the test report itself, so if your project needs fire test certificates, please ask us before you order and we will request them.
The manufacturer does not state any food-contact (FDA, EC 1935/2004), drinking-water (WRAS), REACH, RoHS or other approvals for this profile, so we do not claim any. EPDM resists weather, ozone and UV well but is not resistant to petrol, oils or most solvents.
How it fits

- Check the edge. The panel should be 1 mm to 2 mm thick. Deburr the edge and make sure it is clean and dry.
- Push on. Start at one end and press the trim onto the edge by hand, working along the run.
- Seat it. Tap along the top with a rubber or plastic mallet until the edge sits fully inside the channel. You need no adhesive.
- Cut and finish. Cut through the rubber and wire with side cutters, tin snips or a fine hacksaw. Butt the ends tightly together.
Typical uses
- Interior panel, partition and luggage-rack edges in trains, trams and other rail vehicles
- Cut edges of aluminium and steel panels in rail depots and refurbishment work
- Equipment cabinets and enclosures where a flame-retardant trim is specified
- Bus, coach and public transport interior panels
- Safety edging on machine guards, brackets and access hatches
FAQ
What fire standard does it meet?
The manufacturer states the EPDM compound conforms to EN 45545-2:2020, requirement sets R22 and R23, hazard level HL2, for railway vehicles. If you need the test certificate for your file, ask us before ordering.
What thickness of panel does it fit?
It is made for edges 1 mm to 2 mm thick, such as 1.5 mm aluminium interior panels or 1.2 mm sheet steel. The fins grip less firmly below 1 mm.
How much do I need?
Measure the total run in metres and add about 5 % for cuts and corners. Each length is supplied as one continuous piece, from 20 m up to a full 75 m coil.
Why is 50 m cheaper than 49 m?
The price per metre drops from £15.00 to £13.50 at 50 m. So if you need 45 m to 49 m, ordering 50 m costs the same or less. The full 75 m coil works out at £13.50 per metre.
Do I need glue?
No. The steel wire keeps the jaws clamped and the two fins hold the trim on. Using no adhesive also keeps extra, untested materials out of a fire-rated assembly.
Will it go round corners and curves?
Yes. The wire carrier bends, so the trim follows curves and radiused corners. For a sharp 90° external corner, cut a small V-notch in the inside of the trim so it folds neatly.
How do I cut and join it?
Use side cutters, tin snips or a fine-tooth hacksaw to get through the steel wire, then trim any loose rubber. Butt the ends tightly; no joining piece is needed.
What temperatures can it take?
The manufacturer rates it for −40 °C to +120 °C, and its tests show no cracking after 24 hours at −40 °C.
How is it different from the standard version?
Size and fit are identical. This version uses a flame-retardant compound with a stated EN 45545-2 rating. The standard version has higher published tensile and tear figures and costs less, but has no fire rating.
Complete your project
- EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – standard version
- Fire Rated EPDM Rubber L Profile – 10mm x 14mm – EN 45545-2
- Flame Retardant Silicone Rubber Sheet – Rail EN 45545 HL2
Need help choosing, or need certificates? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team.
Product details
| SKU | IP-EPDMET-FR-7.4X9.7-20M |
|---|---|
| Weight | 3.09 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Fire-Rated EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – EN 45545-2 – 1mm to 2mm Panels – 20m to 75m