
Rubber & FoamSKU IP-CRD-6
EPDM Sponge Half Round Cord – 45° Shore OO – 50m Coil
Price shown updates with the option you pick.
This EPDM sponge half round cord is a soft, flexible cellular rubber profile with a flat back and a rounded face, made for filling gaps, sealing grooves and finishing edges. It is sold as a continuous 50m coil in a choice of 6mm, 8mm or 10mm diameter.
At a glance
- Half round (D-shaped) sponge rubber cord with a flat back
- Cellular EPDM sponge, black
- Soft 45° Shore OO hardness for easy compression
- 6mm, 8mm or 10mm diameter
- Working range -40°C to +100°C
- Sold per 50m coil
Typical uses
- Gap filling and draught sealing on panels and enclosures
- Groove gaskets where a flat back helps the cord sit square
- Neat half round edge trim and cover strip
- Weather-resistant sealing on outdoor equipment
- General maintenance stock for fabrication workshops
Which one do I need?
| Diameter | Height | Best for |
|---|---|---|
| 6mm | 3mm | Fine grooves and narrow gaps |
| 8mm | 4mm | General sealing and medium gaps |
| 10mm | 5mm | Wider gaps and more visible edge trims |
Choose a diameter slightly larger than the gap or groove width so the sponge is lightly compressed once fitted.
Technical drawing
Specification
| Profile | Half round, flat back |
| Diameter | 6mm, 8mm or 10mm |
| Material | Cellular EPDM sponge |
| Hardness | 45° Shore OO |
| Colour | Black |
| Temperature range | -40°C to +100°C |
| Water absorption | 5% |
| Elongation at break | 388% |
| Compression set | 24% (22 hours at 23°C) |
| Sold as | 50m coil |
How much do I need?
Measure every run you want to seal and add around 5% for trimming. For example, sealing the door perimeters of eight cabinets measuring 1.8m x 0.6m needs 8 x 4.8m = 38.4m, plus 5% = about 40m, so one 50m coil covers the job with a little spare.
Fitting tips
- Clean and dry the groove or mating surface before fitting.
- Lay the cord in without stretching it, or it can shrink back and leave gaps.
- Cut with a sharp knife on a board for clean, square ends.
- Use a contact or rubber adhesive on the flat back where a permanent fix is needed.
Complete your project
- EPDM Sponge Door Seal – 21mm x 25.5mm – Per Metre
- EPDM Sponge Strip Section – 19mm x 4mm Tapered Lip – 1.3m Length
- EPDM Sponge Boot Seal – 24.5mm x 13mm – Per Metre
Questions
Can this half round sponge cord be used outdoors?
Yes. EPDM resists UV, ozone and weathering, so it suits exterior equipment and enclosures.
What temperatures does it handle?
It stays flexible from -40°C to +100°C.
How soft is it?
At 45° Shore OO it is a soft sponge that compresses easily under light closing pressure, with 388% elongation at break.
Which way round does it fit?
The flat back sits against the base of the groove or the surface, with the rounded face towards the mating part.
How is it supplied?
As one continuous 50m coil in the diameter you choose.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-CRD-6 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Sponge Half Round Cord – 45° Shore OO – 50m Coil