
Rubber & FoamSKU IP-EPDM-28X23-10M
EPDM Sponge Hood Seal – 28mm x 23mm – Dual Hardness – 10m to 50m Lengths
Price shown updates with the option you pick.
This 28mm x 23mm EPDM sponge hood seal combines a solid EPDM rubber base with an expanded EPDM sponge top section. Choose a single continuous strip length from 10m to 49m, or the full 50m coil; the price shown is for the whole length you select, not per metre. It suits bonnet, hood and hatch sealing on vehicles and plant, as well as general industrial closure seals.
At a glance
- 28mm maximum width x 23mm total height
- Solid EPDM base (8mm wide) for secure fitting
- Expanded EPDM sponge top for air and watertight sealing
- Wide operating temperature range (-40°C to +120°C)
- Excellent resistance to weathering, ozone and heat
- Sold as one continuous strip: 10m to 49m cut lengths or a full 50m coil
Typical uses
- Bonnet and hood seals on vehicles, plant and machinery
- Automotive and vehicle weather stripping
- Glazing and closure seals
- Industrial gaskets and jointing expansion
- Electronics enclosures
Technical drawing
Specification
| Material (Base) | Solid EPDM Rubber |
| Material (Top) | Expanded EPDM Sponge |
| Overall Size | 28mm wide x 23mm high |
| Base Width | 8mm |
| Base Hardness | 70° Shore A |
| Sponge Hardness | 40° Shore OO |
| Density Range | 0.5 – 0.9 g/cm³ |
| Operating Temperature | -40°C to +120°C |
| Colour | Black |
| Unit of sale | One continuous strip of the selected length (10m to 49m) or a full 50m coil |
How much do I need?
Measure the full perimeter of the opening to be sealed and add about 5% for trimming at the joint. For example, a bonnet opening of 1.6m x 1.2m has a perimeter of 5.6m, so two bonnets need about 11.8m: select the 12m length. If you need 45m or more, compare the price of the full 50m coil, which is often better value than a long cut length.
Fitting tips
- Measure the required length carefully before cutting.
- Use a sharp trimming knife for a clean, square cut.
- Avoid stretching the seal during installation to prevent shrinkage later.
- Ensure the 8mm solid base is fully seated in the mounting channel.
- Clean the channel of old seal residue and debris before fitting.
Complete your project
- TPE Sponge Seal – Adhesive Backed – Dual Hardness – 9.5mm x 9.5mm – 100m Coil
- Platinum Cured Silicone Dairy Tubing – Translucent – 10m or 20m Roll
- EPDM Rubber B Fender – 76mm x 32mm – 12m Roll
Data sheet
Download the technical data sheet (PDF)
Questions
Is the price per metre?
No. Each option is priced for the whole continuous strip you select, from 10m up to a full 50m coil.
Is this seal suitable for outdoor use?
Yes, EPDM offers excellent resistance to weathering, ozone and UV, with a temperature range of -40°C to +120°C.
What is the difference between the base and the top section?
The base is solid EPDM (70° Shore A) for rigidity and secure mounting, while the top is expanded EPDM sponge (40° Shore OO) that compresses to give a watertight seal.
Can I cut it to exact lengths on site?
Yes, it cuts cleanly with a sharp knife, so you can trim each run to fit.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-EPDM-28X23-10M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Sponge Hood Seal – 28mm x 23mm – Dual Hardness – 10m to 50m Lengths