
Rubber & FoamSKU IP-IPWBR-180X110-STD
EPDM Weighbridge T Section – 180mm x 110mm – 3m Length
This weighbridge rubber T section is 180mm wide and 110mm deep, extruded in solid black EPDM and sold per 3m straight length. Its domed top flange covers both edges of a wide deck-to-pit gap while the 25.4mm stem fills the void, keeping grit, stones and mud out of the pit so the platform moves freely and weighing stays accurate.
At a glance
- Heavy-duty weighbridge rubber seal in solid black EPDM, 73° Shore A
- 180mm wide domed top flange, 110mm overall depth
- 25.4mm wide stem, 90mm deep below the flange
- Sold per 3m straight length, cut to fit on site
- Resists weathering, UV and ozone in open yards
- Working temperature −40°C to +120°C
Typical uses
- Sealing wide gaps between weighbridge platforms and pit walls
- Keeping debris out of deep weighbridge pits to cut cleaning time
- Replacing worn or split gap seals during weighbridge maintenance
- Heavy-duty exterior gap sealing in transport and logistics yards
Which one do I need?
Choose the profile whose stem matches your gap width: the stem should drop in snugly while the top flange covers both edges.
| Profile | Top flange | Overall depth | Stem | Best for |
|---|---|---|---|---|
| 149mm T section, 2.4m | 149.32mm, ribbed | 48mm | 8mm wide, 30.55mm deep | Narrow deck-to-pit gaps of around 8mm |
| 180 x 110mm T section, 3m (this item) | 180mm, domed | 110mm | 25.4mm wide, 90mm deep | Wider, deeper gaps of around 25mm |
Technical drawing
Specification
| Material | Solid EPDM rubber |
| Colour | Black |
| Top flange width | 180mm, domed |
| Overall depth | 110mm |
| Stem | 25.4mm wide x 90mm deep |
| Hardness | 73° Shore A |
| Tensile strength | 9 MPa |
| Elongation at break | 275% |
| Working temperature | −40°C to +120°C |
| Unit of sale | One 3m straight length |
How much do I need?
Measure every side of the deck you want to seal and add them together. Example: an 18m x 3m weighbridge sealed all round has a 42m perimeter. 42 ÷ 3 = 14, so order 14 lengths, plus one spare if the run has several corners to mitre.
Fitting tips
- Clear stones and compacted grit from the gap first so the 90mm stem seats fully.
- Check the gap is close to 25mm along its run; the stem should be snug, not forced.
- Use a fine-tooth saw for this thick section and keep cuts square for tight butt joints.
- Seat the domed flange evenly over both edges so it does not lift at joints.
Complete your project
- Weighbridge Rubber T Section – 149mm Wide – 2.4m Length
- Hollow Rubber D Fender – 150mm x 150mm – 3m Length
- Hollow Rubber D Fender – 200mm x 200mm – 2m Length
Questions
Can this weighbridge rubber seal be used outdoors?
Yes. Solid EPDM has excellent resistance to weathering, UV and ozone, so it suits exposed weighbridge yards as well as indoor installations.
Will it cope with heavy vehicles crossing the weighbridge?
The deck carries the vehicle; the seal sits in the gap and flexes as the platform moves. Its 73° Shore A EPDM, with 275% elongation at break and 9 MPa tensile strength, recovers its shape after compression.
How is it supplied and can I cut it?
It comes as a straight 3m length. Cut it on site with a sharp heavy-duty knife or a fine-tooth saw, keeping the cuts square for tight butt joints.
Which temperatures can it handle?
The compound is rated from −40°C to +120°C, covering UK winters and hot summer yard surfaces.
Is the 180mm or the 149mm profile right for me?
Measure the gap width. This 180 x 110mm profile has a 25.4mm stem for wider, deeper gaps; the 149mm profile has an 8mm stem for narrow gaps.
Not sure which weighbridge seal fits your gap? Contact our team with the gap width and depth and we will help you choose.
Product details
| SKU | IP-IPWBR-180X110-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Weighbridge T Section – 180mm x 110mm – 3m Length