
Rubber & FoamSKU IP-FEND-150X150-5BC3-STD
Hollow Rubber D Fender – 150mm x 150mm – 3m Length
This hollow rubber D fender, 150mm x 150mm, is a heavy-duty impact strip for quaysides, jetties, loading bays and warehouse walls. Made from firm 72° Shore A NR/SBR rubber with a 75mm hollow centre, it bolts flat-back to the surface and takes repeated knocks from boats, lorries and handling equipment. It is sold as a single 3m length.
At a glance
- Heavy-duty D fender, 150mm wide x 150mm high
- 75mm x 75mm hollow bore that compresses to absorb impact
- Firm 72° Shore A natural rubber / SBR compound
- Flat back for bolting to concrete, steel or timber
- Good weathering resistance for outdoor and marine use
- One 3m length weighing about 69kg
Typical uses
- Quay walls, jetties and marina pontoons
- Workboats and commercial vessels
- Lorry loading bays and dock edges
- Warehouse walls, columns and car park ramps
- Trailer sides and heavy plant protection
Which one do I need?
| Fender | Size | Best for |
|---|---|---|
| Hollow TPE delta D fender | 80mm x 70mm | Small boats, pontoons, light knocks |
| Hollow TPE delta D fender | 150mm x 130mm | Larger pontoons, lighter weight to fit |
| Hollow rubber D fender (this one) | 150mm x 150mm | Quays, dock edges, heavy repeated impact |
| Non-marking EPDM DD fender | 150mm x 150mm | Where black scuff marks are not acceptable |
Technical drawing
Specification
| Material | Natural rubber / SBR blend |
| Outer size | 150mm x 150mm |
| Hollow bore | 75mm x 75mm |
| Hardness | 72° Shore A |
| Weight | 23kg per metre (69kg per length) |
| Colour | Black |
| Unit of sale | One 3m length |
Installation and care
Fix the flat back against the wall, quay or dock face. Drill through the fender and bolt it with heavy-duty anchors suited to the substrate, using large washers to spread the load. The rubber can be cut, drilled and chamfered on site with heavy-duty tools. Inspect fixings periodically, especially after heavy impacts.
Fitting tips
- Plan for the weight: a full 3m length is about 69kg, so use two people or a lifting aid.
- Make sure the mounting surface is flat and strong enough to take the impact loads.
- Space fixings evenly along the length and countersink bolt heads below the rubber surface.
- Cut ends square where lengths butt together for a continuous run.
Complete your project
- Non-Marking EPDM DD Fender – 150mm x 150mm – 3m Length
- Hollow TPE Delta D Fender – 150mm x 130mm – Pack of 2 x 5m
- Hollow TPE Delta D Fender – 80mm x 70mm – 10m Coil
Questions
Can this 150mm x 150mm D fender be used outdoors?
Yes. The NR/SBR compound has good weathering resistance for quaysides, jetties and open loading bays.
How heavy is it?
About 23kg per metre, so a 3m length weighs around 69kg.
Can I cut the rubber fender to a shorter length?
Yes. It can be cut on site with heavy-duty cutting equipment.
How is it fixed?
It is normally bolted through to the surface with heavy-duty anchors and large washers suited to the wall or quay.
Need help choosing the right impact protection? Contact our team for advice.
Product details
| SKU | IP-FEND-150X150-5BC3-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow Rubber D Fender – 150mm x 150mm – 3m Length