
Rubber & FoamSKU IP-WBT-75X75-3M
EPDM Weighbridge T Section – 75mm x 75mm – 3m Length
This solid EPDM weighbridge T section measures 75mm wide by 75mm high and is sold as one 3m length. It seals the gap between a weighbridge platform and its pit wall or apron, stopping dirt, grit and stones from dropping into the load cells and upsetting the readings.
At a glance
- Solid black EPDM rubber weighbridge seal, not sponge
- 75mm wide curved top flange, 75mm overall height
- 63mm deep central leg, 7.5mm thick, for narrow platform gaps
- 73 Shore A hardness: flexes under wheel load and recovers
- Weather, UV and ozone resistant for open-air sites
- Sold per 3m length
Typical uses
- Sealing the perimeter gap of pit-mounted and surface weighbridges
- Keeping grit and debris away from load cells and scale mechanisms
- Replacing worn or split rubber gap seals during weighbridge servicing
- General expansion and movement gap sealing on heavy-duty outdoor platforms
Which one do I need?
| Profile | Best for |
| 75mm x 75mm (this one) | Narrow platform gaps and smaller weighbridges where a compact top flange is enough |
| 110mm x 110mm | Wider gaps and deeper pits that need a longer leg and broader cover |
| 149mm wide | Large gaps on heavy commercial weighbridges |
| 180mm x 110mm | The widest gaps, where a broad top flange must bridge an uneven edge |
Technical drawing
Specification
| Material | Solid EPDM rubber |
| Top flange width | 75mm |
| Overall height | 75mm |
| Leg depth | 63mm |
| Leg thickness | 7.5mm |
| Hardness | 73 Shore A |
| Tensile strength | 9 MPa |
| Elongation at break | 275% |
| Compression set (22 h at 70°C) | 22.5% |
| Temperature range | -40°C to +120°C |
| Colour | Black |
| Unit of sale | One 3m length |
How much do I need?
Measure the full length of gap to be sealed around the platform and divide by 3, then round up. Example: a 15m x 3m weighbridge has a perimeter gap of 36m, so 36 ÷ 3 = 12 lengths. Add one spare length if the corners need mitred joints.
Fitting tips
- Clear the gap of compacted grit, stones and old seal before fitting.
- Push the 7.5mm leg straight down into the gap so the curved flange sits evenly on both edges.
- Butt lengths tightly together and mitre the corners with a sharp knife for a continuous seal.
- Check the gap width first: the leg should be a snug push fit, not loose.
Complete your project
- EPDM Weighbridge T Section – 110mm x 110mm – 3m Length
- Weighbridge Rubber T Section – 149mm Wide – 2.4m Length
- EPDM Weighbridge T Section – 180mm x 110mm – 3m Length
Questions
Can this weighbridge seal be used outdoors?
Yes. EPDM resists weathering, UV and ozone, so it suits open-air weighbridges all year round.
Will it stand up to lorries driving over it?
Yes. The solid 73 Shore A rubber flexes under wheel load and returns to shape, keeping the gap covered.
How do I know if 75mm x 75mm is the right size?
Measure your gap width and depth. The 7.5mm leg needs a snug push fit and the 63mm leg depth must fit the pit; for wider or deeper gaps choose the 110mm x 110mm profile.
Is it sold per metre?
No, each unit is one 3m length. Order as many lengths as your gap perimeter needs.
Can I join lengths together?
Yes. Butt the cut ends tightly; for a fully continuous seal the joints can be bonded with a rubber-compatible adhesive.
Need help choosing the right weighbridge profile? Contact our team for advice.
Product details
| SKU | IP-WBT-75X75-3M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Weighbridge T Section – 75mm x 75mm – 3m Length