
Rubber & FoamSKU IP-EPDME-35X35X15-STD
EPDM Expansion Seal – 35mm x 35mm for 15mm to 25mm Grooves – 25m Roll
This EPDM expansion seal 35mm x 35mm is a black finned joint seal for movement joints and grooves 15mm to 25mm wide in concrete floors, walls, bridges and car park decks: a curved 35mm cap covers the joint while angled fins on a central stem grip the joint faces. It is sold as one continuous 25m roll.
At a glance
- Black EPDM rubber expansion joint seal, 35mm wide x 35mm deep
- Fits joints and grooves from 15mm to 25mm wide
- Two pairs of angled fins hold it in place and resist pull-out
- Deep 35mm profile for joints that see larger movement
- Good weathering, ozone and UV resistance
- 70 Shore A hardness, approx. 0.48kg per metre
Typical uses
- Movement joints in car park decks, ramps and service yards
- Joints in heavy concrete walls and between precast units
- Bridge and tunnel joints exposed to weather and traffic
- Roofing and podium deck joints
- Water treatment plants and other wet, high-load areas
Which one do I need?
| Expansion seal | Joint width |
|---|---|
| EPDM 35mm x 35mm (this item) | 15mm to 25mm, deep 35mm profile |
| EPDM 40mm x 27mm | 22mm to 28mm, wider 40mm cap |
| EPDM 34mm x 30mm | 25mm to 30mm |
| TPE 41mm x 31mm | A TPE alternative for construction joints |
Technical drawing
Specification
| Material | EPDM rubber |
| Colour | Black |
| Size | 35mm wide x 35mm deep |
| Joint width | 15mm minimum, 25mm maximum |
| Hardness | 70 Shore A |
| Weight | Approx. 0.48kg per metre |
| Sold as | One continuous 25m roll |
How much do I need?
Measure the total run of joint and add a little for trimming at ends and junctions. Example: two 12m joints across a loading yard plus a 9m joint along a wall come to 33m, so order two 25m rolls and keep the remainder for future repairs.
Fitting tips
- Check the joint is 15mm to 25mm wide along its length; outside that range choose another size.
- Brush and blow out dust and loose material so the fins bite on sound concrete.
- Push the stem in evenly, working along the joint, until the cap sits flat on both edges.
- Make square cuts with a sharp knife and butt the ends tightly at joins.
Complete your project
- EPDM Expansion Seal – 40mm x 27mm for 22mm to 28mm Gaps – 25m Roll
- EPDM Expansion Seal – Black – 34mm x 30mm – 25m Roll
- Heavy-Duty EPDM Expansion Seal – 80mm x 60mm – 10m Roll
Questions
What joint size does the 35mm x 35mm expansion seal fit?
Joints and grooves from 15mm to 25mm wide. The 35mm cap overlaps both edges of the joint.
Is EPDM suitable outdoors?
Yes. EPDM has very good resistance to weather, ozone and UV, which is why it is used on bridges, decks and external walls.
Do I need to glue it in?
The angled fins grip the joint faces and resist pull-out, so adhesive is not normally needed. A sealant can be added where full watertightness is required.
Why choose this size over the 40mm x 27mm seal?
It suits narrower joints, down to 15mm, and its deeper stem sits further into the joint.
How do I cut it?
A sharp utility knife or heavy-duty shears give a clean, square cut.
Need help choosing the right seal? Contact our team for advice.
Product details
| SKU | IP-EPDME-35X35X15-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Expansion Seal – 35mm x 35mm for 15mm to 25mm Grooves – 25m Roll