
Rubber & FoamSKU IP-EPDME-40X27X22-STD
EPDM Expansion Seal – 40mm x 27mm for 22mm to 28mm Gaps – 25m Roll
This EPDM expansion seal 40mm x 27mm is a black finned joint seal for movement joints 22mm to 28mm wide in concrete floors, walls, car park decks and other structures, with a 40mm curved cap that covers the joint and a finned stem that grips its sides. It is sold as one continuous 25m roll.
At a glance
- Black EPDM rubber expansion joint seal, 40mm wide x 27mm deep
- Fits joint gaps from 22mm to 28mm wide
- Three tiers of flexible fins hold it in the joint without adhesive
- Curved cap keeps water, grit and debris out of the joint
- Good weathering and UV resistance for outdoor use
- 70 Shore A, working range -40°C to +120°C
Typical uses
- Movement joints in multi-storey car park decks and ramps
- Joints between concrete walls, slabs and precast panels
- Bridge, tunnel and roofing joints that see repeated movement
- Joints in water treatment and other wet plant areas
- Heavily trafficked floors where a compression seal is needed
Which one do I need?
| Expansion seal | Joint width |
|---|---|
| EPDM 34mm x 30mm | 25mm to 30mm, slimmer cap |
| EPDM 40mm x 27mm (this item) | 22mm to 28mm, wide 40mm cap |
| TPE 65mm x 50mm | 35mm to 45mm joints |
| EPDM 80mm x 60mm | 60mm to 75mm heavy-duty joints |
Technical drawing
Specification
| Material | EPDM rubber |
| Colour | Black |
| Cap width | 40mm |
| Overall depth | 27mm |
| Joint width | 22mm minimum, 28mm maximum |
| Hardness | 70 Shore A |
| Weight | Approx. 0.33kg per metre |
| Operating temperature | -40°C to +120°C |
| Tolerance class | ISO 3302-1 E2 / L2 |
| Sold as | One continuous 25m roll |
How much do I need?
Add up the total length of joint to be sealed and allow a little for trimming. Example: a car park deck with three 15m movement joints needs 45m, so order two 25m rolls and keep the spare 5m for repairs.
Fitting tips
- Check the joint is between 22mm and 28mm wide along its whole length before fitting.
- Clean out dust, loose concrete and standing water so the fins can grip the joint faces.
- Press the stem in by hand or with a rubber mallet until the cap sits flush on both sides.
- Cut square with heavy-duty shears or a sharp knife and butt ends tightly together.
Complete your project
- EPDM Expansion Seal – Black – 34mm x 30mm – 25m Roll
- TPE Expansion Seal – Black – 41mm x 31mm – 25m Coil
- TPE Expansion Seal – 40mm x 35.9mm – 25m Roll
Questions
What joint width does the 40mm x 27mm seal fit?
It is made for joints between 22mm and 28mm wide. The 40mm cap overlaps the joint edges on both sides.
Can this expansion seal be used outdoors?
Yes. EPDM has good resistance to weather, ozone and UV, so it suits external decks, walls and bridges.
Does it need adhesive?
The three tiers of fins grip the joint faces on their own. A compatible sealant can be added where the joint must be fully watertight.
Will it take vehicle traffic?
It is designed for repeated compression in high-load areas such as car parks, provided the joint stays within its 22mm to 28mm range.
How do I cut it?
Use heavy-duty shears or a sharp utility knife and make a square cut.
Need help choosing the right seal? Contact our team for advice.
Product details
| SKU | IP-EPDME-40X27X22-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Expansion Seal – 40mm x 27mm for 22mm to 28mm Gaps – 25m Roll