
Rubber & FoamSKU IP-EPDMET-7.4X9.7-20M
EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – Fits 1mm to 2mm Panels – 20m to 75m
Price shown updates with the option you pick.
A solid black EPDM rubber edge trim with a steel wire carrier that pushes onto 1 mm to 2 mm sheet edges and holds by grip alone, with no glue. The profile is 7.4 mm wide and 9.7 mm high. A U-shaped steel wire runs inside the rubber for the full length and keeps the jaws clamped, while two angled fins inside the 3.6 mm mouth fold against both faces of the panel and stop it pulling off. EPDM stays flexible from −40 °C to +120 °C and stands up to sun, ozone and weather, so it suits outdoor and indoor edges alike. Choose any continuous length from 20 m to 74 m, or a full 75 m coil. It is in stock in the UK for same-day dispatch.
At a glance
- Fits: sheet metal, glass, plastic, fibreglass and board edges 1 mm to 2 mm thick
- Size: 7.4 mm wide × 9.7 mm high; 3.6 mm mouth; 7.8 mm inner depth
- Construction: solid EPDM rubber, 70° Shore A, moulded over a U-shaped steel wire carrier
- Grip: twin internal fins and the wire clamp hold it on with no adhesive, so it can be removed and refitted
- Working temperature: −40 °C to +120 °C
- Weight: 0.07 kg per metre
- Price: £6.60 per metre inc VAT for 20 m to 49 m; £5.10 per metre for 50 m and over (75 m coil £382.50)
Need fire-rated trim for rail or public transport? The same 7.4 × 9.7 mm profile is available in a flame-retardant EPDM compound stated to EN 45545-2: Fire-Rated EPDM Self-Grip Edge Trim 7.4 × 9.7 mm.
Technical drawing

All dimensions are in mm and nominal. The drawing is not to scale. The carrier and fin shapes are shown as typical.
Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile | Self-gripping U edge trim with steel wire carrier and twin internal gripping fins | Manufacturer drawing |
| Overall width | 7.4 mm | Manufacturer drawing and data sheet |
| Overall height | 9.7 mm | Manufacturer drawing and data sheet |
| Mouth opening (unflexed, between the feet) | 3.6 mm | Manufacturer drawing |
| Inner depth (mouth to inside of crown) | 7.8 mm | Manufacturer drawing |
| Crown thickness | 1.9 mm | Calculated: 9.7 − 7.8 |
| Side wall each side of the mouth | 1.9 mm | Calculated: (7.4 − 3.6) ÷ 2 |
| Panel thickness it fits | 1 mm to 2 mm | Manufacturer product data |
| Material | Solid EPDM (ethylene propylene diene monomer) rubber | Manufacturer data sheet |
| Carrier | Steel wire, U-shaped, full length | Manufacturer |
| Colour | Black | Manufacturer |
| Hardness | 70° Shore A (data sheet: 70° to 71°) | ISO 7619-1 |
| Tensile strength | 7.8 MPa | ISO 37 |
| Elongation at break | 340 % | ISO 37 |
| Tear resistance | 22.18 N/mm | ISO 34-1 |
| Compression set (22 h at 100 °C) | 23.12 % | ISO 815 |
| Hardness change after low-temperature ageing (168 h at −10 °C) | +4° Shore A | DIN 53505 |
| Ozone resistance (72 h at 40 °C, 50 pphm) | No cracking | ISO 1431-1, method A |
| UV resistance | No migration | ASTM D1148 |
| Brittleness (24 h at −40 °C) | No cracking | ISO 812 |
| Minimum working temperature | −40 °C | Manufacturer data |
| Maximum working temperature | +120 °C | Manufacturer data |
| Weight | 0.07 kg per metre | Manufacturer data |
| Density | Not stated for this profile | Ask us if you need it |
| Dimensional tolerance | Not stated; dimensions are nominal | Ask us if you need it |
| Supplied as | One continuous length, 20 m to 74 m, or a full 75 m coil | — |
| Price | £6.60/m inc VAT (20–49 m); £5.10/m inc VAT (50–75 m) | — |
Materials and compliance
The trim is solid EPDM rubber moulded over a steel wire carrier. EPDM keeps its flexibility in frost and summer heat and resists UV, ozone and weathering, which is why the manufacturer's tests show no cracking after ozone exposure or at −40 °C. It is a good choice for outdoor sheet edges. EPDM is not resistant to petrol, oils or most solvents, so do not use it where it will be soaked in them. The manufacturer does not state any food-contact (FDA, EC 1935/2004), drinking-water (WRAS), fire-rating, REACH, RoHS or other product approvals for this standard version, so we do not claim any. If you need fire performance, choose the fire-rated version.
How it fits

- Check the edge. The panel should be 1 mm to 2 mm thick. Deburr the edge and make sure it is clean and dry.
- Push on. Start at one end and press the trim onto the edge by hand, working along the run.
- Seat it. Tap along the top with a rubber or plastic mallet until the edge sits fully inside the channel. You need no adhesive.
- Cut and finish. Cut through the rubber and wire with side cutters, tin snips or a fine hacksaw. Butt the ends tightly together.
Typical uses
- Finishing cut edges on sheet steel and aluminium panels, enclosures and computer or electrical cabinets
- Safety edging on machine guards, brackets and access hatches
- Garage doors, sheds, playground equipment and other outdoor sheet edges
- Fibreglass and composite panels on boats and marine equipment
- Vehicle interior side panels and side window surrounds
- Protecting sheet and glass edges in storage and transport
FAQ
What thickness of panel does it fit?
It is made for edges 1 mm to 2 mm thick, which covers most 1.2 mm and 1.5 mm sheet steel, 2 mm aluminium and thin glass or acrylic. The fins grip less firmly below 1 mm. For thinner edges, look at our 5.5 × 8.5 mm or 6.5 × 9.5 mm PVC trims.
How much do I need?
Measure the total run in metres and add about 5 % for cuts and corners. Each length is supplied as one continuous piece, from 20 m up to a full 75 m coil.
Why is 50 m cheaper than 45 m?
The price per metre drops from £6.60 to £5.10 at 50 m. So if you need 39 m to 49 m, ordering 50 m costs the same or less. The full 75 m coil is the best value at £5.10 per metre.
Do I need glue?
No. The steel wire keeps the jaws clamped and the two fins hold the trim on. Because there is no adhesive, you can remove it and fit it again.
Will it go round corners and curves?
Yes. The wire carrier bends, so the trim follows curves and radiused corners. For a sharp 90° external corner, cut a small V-notch in the inside of the trim so it folds neatly without bunching.
How do I cut and join it?
Because of the steel wire, a knife alone will not do. Use side cutters, tin snips or a fine-tooth hacksaw, then trim any loose rubber. Butt the ends tightly for a neat joint; no joining piece is needed.
What temperatures can it take?
The manufacturer rates it for −40 °C to +120 °C, and its tests show no cracking after 24 hours at −40 °C. That covers outdoor UK use all year and warm machinery, but not ovens or exhaust parts.
Can it be used outdoors?
Yes. EPDM is one of the most weather-resistant rubbers. The manufacturer's ozone and UV tests show no cracking and no migration, so it suits garage doors, sheds, boats and outdoor equipment.
What is the difference between this and the fire-rated version?
The size and fit are the same. The fire-rated version uses a flame-retardant EPDM compound stated to EN 45545-2 for rail vehicles. This standard version has higher published tensile, tear and elongation figures and costs less, but has no fire rating.
Is it food safe?
No food-contact or drinking-water approvals are stated for this profile, so do not use it where those are required.
Complete your project
- Fire-Rated EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – EN 45545-2
- Self-Grip PVC Edge Trim – 6.5mm x 9.5mm – for 1mm to 1.5mm panels
- Self-Grip PVC Edge Trim – 5.5mm x 8.5mm – 14m to 50m lengths
- PVC Self-Grip Edge Trim – 12mm x 15.5mm – for thicker panels
Need help choosing or fitting? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team.
Product details
| SKU | IP-EPDMET-7.4X9.7-20M |
|---|---|
| Weight | 3.09 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Self-Grip Edge Trim – 7.4mm x 9.7mm – Fits 1mm to 2mm Panels – 20m to 75m