
Rubber & FoamSKU IP-CPR-71X13-9M
Hazard Warning Cable Protector – 71mm x 13mm – 9m Roll
This hazard warning cable protector 71mm x 13mm is a low profile black floor cable cover with bright yellow warning bands along both sides, so trailing leads are covered and clearly marked. It is sold as one continuous 9m roll that you cut to the lengths you need, with a 15mm x 8mm channel and a split base for quick cable insertion.
At a glance
- 71mm wide x 13mm high low profile cable cover
- 15mm x 8mm channel for power and data leads
- Yellow hazard warning bands on both ramps
- Split base: press cables in without unplugging them
- Ribbed underside resists creeping on smooth floors
- Weather-resistant 85° Shore A elastomer; 9m roll
Typical uses
- Marking and covering cable runs across office walkways and server rooms
- Trip hazard control in pedestrian corridors and warehouse offices
- Retail aisles, public venues and exhibition halls
- Light trolley routes and temporary outdoor event set-ups
Which one do I need?
| Cable protector | Choose it when |
| 71mm x 13mm hazard warning (this one) | Leads up to 15mm x 8mm in busy walkways where the cover must stand out |
| 83mm x 16mm hazard warning | Slightly larger leads, sold in shorter single lengths |
| 83mm x 16mm plain black or grey | A discreet cover in offices where warning colours are not wanted |
Technical drawing
Specification
| Material | Elastomer |
| Overall size | 71mm wide x 13mm high |
| Channel size | 15mm x 8mm |
| Colour | Black body, yellow warning bands |
| Hardness | 85° Shore A |
| Tensile strength | 15.1 MPa |
| Elongation at break | 258% |
| Working temperature | -15°C to +55°C |
| Unit of sale | One 9m roll |
How much do I need?
Add up the width of every walkway the cable crosses and allow about 300mm beyond each edge. Example: three 1.5m aisle crossings need 3 x (1.5m + 0.6m) = 6.3m, so one 9m roll covers them with 2.7m left for another crossing.
Fitting tips
- Unroll the protector and let it relax flat at room temperature before fitting.
- Clean and dry the floor so the ribbed underside sits evenly.
- Open the split base and press the cable up into the channel, working along from one end.
- Cut lengths square with a sharp knife against a straight edge.
- Lay it straight across the walkway so people meet the ramp head-on.
Complete your project
- Hazard Warning Cable Protector – 83mm x 16mm
- Rubber Cable Protector – 83mm x 16mm Low Profile
- Multi-Fit Cable Protector – 88mm x 14mm
Questions
Can this hazard warning cable protector be used outdoors?
Yes. The elastomer is weather resistant and suits temporary outdoor set-ups within -15°C to +55°C.
What size cable will it take?
The channel is 15mm x 8mm, so it suits one flat or round lead, or two thin leads, that fit without forcing the base open.
Do I need tools to fit cables?
No. The split base opens by hand and closes around the cable.
Can wheelchairs and trolleys cross it?
Yes. At 13mm high with sloped sides it is easy to cross for wheelchairs and light trolleys.
Can I cut the 9m roll into shorter pieces?
Yes. Cut it with a sharp knife into as many crossing lengths as you need.
Need help choosing a floor cable cover? Contact our team for help.
Product details
| SKU | IP-CPR-71X13-9M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hazard Warning Cable Protector – 71mm x 13mm – 9m Roll