
Rubber & FoamSKU IP-CPR-83X16-1M-BLACK
Rubber Cable Protector – 83mm x 16mm Low Profile – 1m to 9m Lengths
Price shown updates with the option you pick.
This rubber cable protector 83mm x 16mm is a low profile floor cable cover that keeps trailing leads flat and visible across offices, walkways and light industrial floors. It is sold as one continuous length of 1m, 1.5m, 3m or 9m, in black or grey, with ⌀11mm cable channels and a slit base so connected cables push straight in.
At a glance
- 83mm wide x 16mm high low profile cable cover
- Cable channels take leads up to ⌀11mm
- Hard-wearing NR/SBR rubber blend, 75° Shore A
- Slit base: press cables in without unplugging them
- Gentle ramped sides for wheelchairs and trolleys
- Black or grey; 1m, 1.5m, 3m or 9m lengths
Typical uses
- Floor cable tidy for trailing leads in offices and server rooms
- Covering power and data cables across interior walkways
- Reducing trip hazards in print rooms, workshops and light industrial areas
- Wheelchair-friendly cable management in public buildings and events
- Temporary cable runs for exhibitions, AV set-ups and maintenance work
Which one do I need?
| Length | Best for |
| 1m | Crossing a single doorway or desk gap |
| 1.5m | Standard corridor or aisle crossing |
| 3m | Wider walkways and open-plan office runs |
| 9m | Long cable runs along a wall or across a hall |
| Larger cables | For leads over 11mm see the 127mm x 28mm cable protector with a 23mm hole |
Technical drawing
Specification
| Size | 83mm wide x 16mm high |
| Cable channel | ⌀11mm |
| Material | Natural rubber / SBR blend |
| Hardness | 75° ±5° Shore A |
| Colour | Black or grey |
| Unit of sale | One continuous length: 1m, 1.5m, 3m or 9m |
| Fire resistance | Tested to BS 476 Part 7 Class 3 |
| Electrical test | BS 903-C5, 500V |
| Halogen content | Halogen free |
How much do I need?
Measure the width of the walkway the cable crosses and add about 300mm each side so the ends sit clear of foot traffic. Example: a 1.2m corridor plus 2 x 0.3m = 1.8m, so order the 3m length and trim the excess with a sharp knife, or use one 1.5m length if the cable can enter close to the wall.
Fitting tips
- Lay the protector flat at room temperature for a few hours so any curl from storage relaxes.
- Clean the floor first so grit does not sit under the base.
- Open the base slit and press cables in one at a time; the rubber closes back around them.
- Cut to length with a sharp utility knife against a straight edge for a square, neat end.
- Run the protector square across the walkway, not at an angle, so people meet the ramp head-on.
Complete your project
- Hazard Warning Cable Protector – 83mm x 16mm
- Low Profile Cable Protector – 83mm x 14mm
- Multi-Fit Cable Protector – 88mm x 14mm
Questions
Can wheelchairs and trolleys cross this cable protector?
Yes. At only 16mm high with ramped sides, wheelchairs, sack trucks and light trolleys roll over it easily.
Do I have to unplug my cables to fit it?
No. The base has a slit, so you open it and press connected cables straight into the 11mm channels.
Can it be used outdoors?
Yes, the NR/SBR rubber blend is UV stable, so it suits outdoor events and yards as well as indoor floors.
Is it safe for public indoor spaces?
It is halogen free and fire tested to BS 476 Part 7 Class 3, which suits offices, schools and public buildings.
Black or grey – which should I choose?
Grey stands out on dark floors and carpets; black blends in on dark floors where a discreet floor cable cover is wanted.
Need help choosing a floor cable cover? Contact our team and we will advise.
Product details
| SKU | IP-CPR-83X16-1M-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rubber Cable Protector – 83mm x 16mm Low Profile – 1m to 9m Lengths