
Rubber & FoamSKU IP-RDF-73X48-3M
Hollow EPDM DD Fender – 73mm x 48mm – 3m Length
This hollow EPDM DD fender, 73mm x 48mm, gives heavy-duty impact protection to loading bays, platform edges, vehicle sides and marine pontoons. It is supplied as a single 3m length of black EPDM with a 53mm x 28mm D-shaped hollow core that compresses on impact and recovers its shape.
The dense 70 Shore A EPDM compound resists weathering, ozone, tearing and abrasion, so the fender works equally well indoors and outside. Its wide flat back gives a stable fixing face, while the rounded front spreads the load of a knock across a large contact area.
At a glance
- Hollow D fender profile, 73mm wide x 48mm high
- 53mm x 28mm hollow core for energy absorption
- Black EPDM rubber, 70 Shore A
- Weathering and abrasion-resistant rubber bumper strip
- Supplied as one 3m length, easy to cut on site
- Fix into a channel or bolt directly to the surface
Typical uses
- Loading bay and dock edge protection
- Marine pontoons, jetties and quay walls
- Vehicle and trailer side bumpers
- Car park walls and structural columns
- Platform and machinery guard edges
Which one do I need?
| Size | Best for |
| 40mm x 25mm | Light knocks on trolleys, racking ends and small platforms |
| 64mm x 41mm | Medium-duty platform, vehicle and pontoon edges |
| 73mm x 48mm (this fender) | Heavier vehicle contact and busy loading bays where a lower profile is needed |
| 82mm x 50mm | Wider contact face for docks and quay walls |
| 100mm x 100mm | Heavy-duty dock bumpers and marine berthing |
Technical drawing
Specification
| Profile | Hollow D fender |
| Material | EPDM rubber |
| Colour | Black |
| Outer size | 73mm wide x 48mm high |
| Hollow core | 53mm x 28mm |
| Hardness | 70 Shore A |
| Weight | 2.5kg per metre |
| Tensile strength | 7.8 MPa |
| Elongation at break | 340% |
| Unit of sale | One 3m length |
Installation and care
Fit the fender into a retaining channel, or bolt it straight through the flat base for a permanent installation. It cuts cleanly to length on site with a sharp blade or a fine-toothed saw. Clean with water and a mild detergent; no other maintenance is needed.
Fitting tips
- Make sure the mounting face is clean, flat and sound before fixing.
- When bolting, use a flat bar or large washers inside the hollow to spread the load so bolt heads cannot pull through.
- Drill a larger access hole in the curved face so a socket can reach the fixing in the base.
- On long outdoor runs, leave a small gap between lengths for thermal movement.
Complete your project
- EPDM Hollow D Fender – 40mm x 25mm
- EPDM D Fender – 32mm x 22mm Hollow Profile
- Hollow EPDM D Fender – 100mm x 100mm – 3m Length
Questions
Can this EPDM D fender be used outdoors?
Yes. EPDM resists UV, ozone and weathering, so it suits outdoor loading bays and marine pontoons.
How do I fix the rubber bumper strip to a wall?
Bolt it through the flat base, using a flat bar or large washers inside the hollow, or slide it into a suitable retaining channel.
Can I bend it around corners?
The thick walls of the 73mm x 48mm profile suit straight runs and gentle curves. For tight corners, cut and mitre the ends.
Is it supplied in one piece?
Yes, each order line is one continuous 3m length that you can cut to the lengths you need.
How does it compare with the 82mm x 50mm fender?
Both are EPDM hollow D profiles; the 82mm version has a wider contact face, while this 73mm size suits places where space is tighter.
Need help choosing the right impact protection? Contact our team.
Product details
| SKU | IP-RDF-73X48-3M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow EPDM DD Fender – 73mm x 48mm – 3m Length