
Rubber & FoamSKU IP-FEND-100X100-STD
Hollow EPDM D Fender – 100mm x 100mm, 50mm Chamber – 3m Length
This hollow EPDM D fender 100mm x 100mm is a heavy duty rubber dock and quay bumper with a 50mm x 50mm hollow chamber, made to absorb impacts from lorries, workboats and plant on straight runs of wall. It is sold as one 3m length.
At a glance
- Rubber D fender profile: 100mm wide x 100mm deep
- 50mm x 50mm hollow chamber for a softer, energy-absorbing impact
- Flat back for bolting to walls, quays, hulls and dock faces
- EPDM rubber, 72 Shore A, about 9kg per metre
- Resists UV, weathering, ozone and water
- One continuous 3m length
Typical uses
- Loading bay bumpers and dock edge protection
- Quay, pontoon and jetty fendering
- Belting on tugs, workboats and dredgers
- Warehouse walls, car park walls and column runs
- Trailer sides and container edges
Which one do I need?
| Fender | Size | Best for |
|---|---|---|
| Hollow TPE Delta D Fender | 80mm x 70mm | Light vehicles, forklift routes, small boats |
| Hollow EPDM D fender (this item) | 100mm x 100mm | Lorry docks, workboats, general quay protection |
| Hollow TPE Delta D Fender | 150mm x 130mm | Larger vessels and busy loading bays |
| Hollow Rubber D Fender | 250mm x 250mm | Heavy berthing and the biggest impacts |
Technical drawing
Specification
| Product | Hollow D fender, flat back |
| Outer size | 100mm wide x 100mm deep |
| Hollow chamber | 50mm x 50mm |
| Material | EPDM rubber |
| Hardness | 72 Shore A |
| Weight | Approx. 9kg per metre |
| Colour | Black |
| Unit of sale | One 3m length |
How much do I need?
Measure each wall or dock face you want to protect and divide by 3m, rounding up. A standard 3m wide loading bay needs one length per bumper line; a 10m quay frontage needs four lengths (12m), trimmed to fit. Allow two lines on docks used by both high and low trailers.
Fitting tips
- Fix through the flat back with heavy duty anchors or bolts and large washers so the rubber does not tear.
- Pre-drill the fender at even centres (about 300-500mm) before offering it up.
- Fit on straight runs only; this rigid profile is not made to bend round corners.
- Butt neighbouring lengths tightly to keep the protection continuous.
- Cut with a sharp blade or fine saw for a clean, square end.
Complete your project
- Hollow Rubber D Fender – 250mm x 250mm – 72 Shore A – 2m Length
- Hollow TPE Delta D Fender – 150mm x 130mm – Pack of 2 x 5m
- Hollow TPE Delta D Fender – 80mm x 70mm – 10m Coil
Questions
Why is the D fender hollow?
The 50mm chamber lets the rubber compress on impact, so it absorbs more energy and is gentler on vehicles and hulls than a solid bumper.
How is this dock bumper fixed in place?
Bolt it through the flat back into the wall, quay or hull, or seat it in a retaining channel.
Can it go round a corner?
No. It is a rigid heavy duty profile, so use it on straight runs and cut separate lengths for each face.
Is the EPDM fender suitable outdoors and near water?
Yes. EPDM resists UV, weathering, ozone and water, so it suits marine and outdoor sites.
How heavy is a 3m length?
About 27kg, so plan for two people when fitting.
Need help choosing the right fender? Contact our team.
Product details
| SKU | IP-FEND-100X100-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow EPDM D Fender – 100mm x 100mm, 50mm Chamber – 3m Length