
Rubber & FoamSKU IP-FEN-250X250-STD
Hollow Rubber D Fender – 250mm x 250mm – 72 Shore A – 2m Length
This hollow rubber D fender, 250mm x 250mm, is our largest heavy-duty impact fender for busy lorry loading bays, quay walls, jetties and large commercial vessels. Made from firm 72° Shore A NR/SBR rubber with a 125mm hollow centre, it bolts flat-back to the surface and soaks up repeated heavy knocks. It is sold as a single 2m length.
At a glance
- Heavy-duty rubber D fender, 250mm wide x 250mm high
- 125mm x 125mm hollow bore that compresses to absorb impact energy
- Firm 72° Shore A natural rubber / SBR compound with high tear strength
- Flat back for bolting or channel mounting on concrete, steel or timber
- Can be drilled, chamfered, pre-curved and cut on site
- One 2m length weighing about 102kg
Typical uses
- Loading bay walls and dock edges hit by reversing lorries
- Tugs, workboats and other large commercial vessels
- Marinas, jetties and quay walls
- Warehouse walls, columns and car park structures
- Trailer sides and heavy plant protection
Which one do I need?
| Fender | Size | Best for |
|---|---|---|
| Hollow rubber D fender | 150mm x 150mm | Quays and dock edges with regular impacts |
| Hollow rubber D fender | 200mm x 200mm | Loading bays and large vessels with heavy impacts |
| Hollow rubber D fender (this one) | 250mm x 250mm | The heaviest impacts: busy dock levellers, tugs and large vessels |
| Non-marking EPDM DD fender | 150mm x 150mm | Where black scuff marks are not acceptable |
Technical drawing
Specification
| Material | Natural rubber / SBR blend |
| Outer size | 250mm x 250mm |
| Hollow bore | 125mm x 125mm |
| Hardness | 72° Shore A |
| Weight | 51kg per metre (102kg per length) |
| Colour | Black |
| Unit of sale | One 2m length |
Installation and care
Fix the flat back against the dock wall, quay or structure, either seated in a retaining channel or bolted straight through with heavy-duty anchors and large washers to spread the load. The rubber can be drilled, chamfered, pre-curved and cut on site with heavy-duty tools. Check fixings periodically, especially after heavy impacts.
Fitting tips
- Plan for the weight: a 2m length is about 102kg, so use mechanical lifting equipment.
- Make sure the mounting face is flat and strong enough to take lorry or vessel impact loads.
- Countersink bolt heads well below the rubber surface so they cannot touch the vehicle or hull.
- Cut ends square where lengths butt together for a continuous run along a dock edge.
Complete your project
- Hollow Rubber D Fender – 150mm x 150mm – 3m Length
- Non-Marking EPDM DD Fender – 150mm x 150mm – 3m Length
- Hollow Rubber D Fender – 200mm x 200mm – 72 Shore A – 2m Length
Questions
What is a 250mm x 250mm rubber D fender used for?
It protects loading bays, quay walls and large vessels where impacts are at their heaviest, such as busy dock levellers or tugs coming alongside.
How heavy is it?
About 51kg per metre, so one 2m length weighs around 102kg.
Can I cut it to a shorter length?
Yes. It can be cut, drilled and chamfered on site with heavy-duty cutting equipment.
How is it fixed?
Either seated in a retaining channel or bolted through the flat back with heavy-duty anchors and large washers suited to the wall or quay.
What does NR/SBR mean?
It is a blend of natural rubber and styrene butadiene rubber, chosen for high tensile and tear strength and good resistance to fatigue.
Need help choosing the right impact protection? Contact our team for advice.
Product details
| SKU | IP-FEN-250X250-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow Rubber D Fender – 250mm x 250mm – 72 Shore A – 2m Length