
Rubber & FoamSKU IP-IELCP-180X36-BLACK
Rubber Cable Protector – 180mm x 36mm, 30mm Hole – 4.5m Length
Price shown updates with the option you pick.
This rubber cable protector 180mm x 36mm is a heavy-duty, low-profile floor cover with a single 30mm cable hole and a split base, built to shield power leads, air lines and hoses from forklifts, pallet trucks and foot traffic. It is sold as one 4.5m length in black or grey.
At a glance
- 180mm wide x 36mm high hump profile with gently tapered sides
- One 30mm diameter cable channel running the full length
- Split base: open the underside and press cables or hoses straight in
- Tough natural rubber / SBR blend, 75 ± 5 Shore A
- UV stable for outdoor yards and building sites
- Fire tested to BS 476 Part 7 Class 3, halogen free
- Supplied as a single 4.5m length, black or grey
Typical uses
- Floor cable cover across warehouse aisles and goods-in areas used by forklifts
- Protecting a welding lead, air line or water hose on construction sites
- Covering trailing power cables to fixed machinery in workshops and factories
- Temporary cable runs at events, loading yards and outdoor work areas
- Reducing trip hazards where leads cross walkways
Which one do I need?
| Cable protector | Profile | Best for |
| 83mm x 14mm low profile | Small channels, very low hump | Office, retail and pedestrian walkways with thin leads |
| 108mm x 14mm, 2 channel | Two small channels | Separating power and data leads under light traffic |
| 120mm x 24mm multi-compartment | Several mid-size channels | Several leads together in workshops and yards |
| 180mm x 36mm (this item) | One 30mm hole, split base | A single thick cable, welding lead or hose under forklift traffic |
Technical drawing
Specification
| Profile | 180mm wide x 36mm high hump with one cable channel |
| Cable channel | 30mm diameter, split base for insertion |
| Material | Natural rubber / SBR blend |
| Hardness | 75 ± 5 Shore A |
| Colour | Black or grey |
| Unit of sale | One 4.5m length |
| Fire performance | Tested to BS 476 Part 7 Class 3 |
| Electrical test | Tested to BS 903 Part C5, 500V |
| Halogens | Halogen free |
| Outdoor use | UV stable |
How much do I need?
Measure the width of the aisle or walkway the cable crosses and divide by 4.5m, rounding up. Example: a cable crossing a 12m loading bay needs 12 ÷ 4.5 = 2.7, so order 3 lengths and butt them tightly end to end. Allow a little extra at each side so the protector runs past the traffic zone rather than stopping at its edge.
Fitting tips
- Unroll the length and let it lie flat in a warm area for a few hours before fitting so it settles without curl.
- Turn it over, open the split base and press the cable or hose up into the 30mm channel along its full length.
- Lay it on a clean, level floor so it sits flat and does not rock under wheels.
- Cross the traffic route at right angles where possible; wheels ride over a square crossing more smoothly.
- Check the cable fits loosely in the 30mm channel; a tight fit can trap heat on heavily loaded power cables.
Complete your project
- Hazard Warning Cable Protector – 83mm x 16mm for high-visibility walkway crossings
- 3 Channel Lidded Cable Protector for several heavy cables under vehicle traffic
- Multi-Compartment Cable Protector – 120mm x 24mm for mixed leads
Questions
Will this cable protector take forklift and vehicle traffic?
Yes. The thick rubber hump is made to protect cables and hoses from wheeled traffic in warehouses, yards and building sites.
What size cable fits inside?
The single channel is 30mm in diameter, so it suits one thick power cable, welding lead, air line or water hose up to just under 30mm across.
How do I get the cable in without threading it?
The base is split along its length. Turn the protector over, part the split and push the cable up into the channel; the rubber closes back around it.
Can it stay outdoors?
Yes. The rubber blend is UV stable and suited to long-term use in yards and on site.
Is this floor cable cover safe for pedestrians?
The 36mm hump has tapered sides to reduce trip risk, and the grey option is easier to see on dark floors. For busy walkways, pair it with a hazard warning cable protector.
Need help choosing a cable protector? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-IELCP-180X36-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rubber Cable Protector – 180mm x 36mm, 30mm Hole – 4.5m Length