
Rubber & FoamSKU IP-IHVCP-156X30-STD
Hi-Vis Cable Protector 156mm x 30mm – 2 x 23mm Channels – 4.5m Length
This hi-vis cable protector 156mm x 30mm is a heavy-duty rubber floor cover with two 23mm channels and bright yellow warning strips, built to carry power cables and hoses safely across busy industrial floors, including where vehicles cross. It is sold as one 4.5m length.
At a glance
- 156mm wide x 30mm high with gently sloped sides
- Two 23mm diameter channels for cables or hoses
- Yellow hazard strips along both edges
- Split base: push cables in from underneath
- Natural rubber / SBR, 75 ±5 Shore A, ribbed anti-slip underside
- Halogen-free, UV stable, tested to BS 476 Part 7 Class 3
Typical uses
- Power cables and air or water hoses crossing warehouse and distribution aisles
- Temporary supplies on construction sites and work yards
- Machine feeds crossing factory and machine-shop floors
- Outdoor cable runs at events, yards and loading areas
Which one do I need?
Choose by how many runs you need to carry and how big they are:
| Profile | Suits |
|---|---|
| Hazard cable protector 68mm x 15mm | One small cable up to 14 x 8mm, pedestrian areas |
| Hi-vis cable protector 156mm x 30mm (this item) | Two cables or hoses up to 23mm, industrial floors |
| Hi-vis cable protector 178mm x 30mm | Three cables or hoses up to 23mm |
Technical drawing
Specification
| Material | Natural rubber / SBR blend |
| Colour | Black with yellow strips |
| Width | 156mm |
| Height | 30mm |
| Channels | 2 x 23mm diameter |
| Cable entry | Split membrane in the base |
| Hardness | 75 ±5 Shore A |
| Fire | Tested to BS 476 Part 7 Class 3 |
| Halogens | Halogen-free |
| Unit of sale | One 4.5m length |
How much do I need?
Measure the width of the floor the cables have to cross and divide by 4.5m, rounding up. Example: an 8m wide loading area needs two lengths (9m) butted end to end, trimmed if necessary. A standard 3m aisle is covered by a single length with room to tuck the ends against racking.
Fitting tips
- Check each cable or hose fits a 23mm channel; use one run per channel.
- Sweep the floor, then lay the protector flat and let it relax before final positioning.
- Open the split base and press the cables up into the channels one at a time so they do not twist.
- On long crossings, butt lengths tightly together so there is no step between them.
Complete your project
- Hi-Vis Rubber Cable Protector – 178mm x 30mm – 4.5m Length
- Hazard Warning Cable Protector – 68mm x 15mm – Per Length
- 2 Channel Cable Protector – 107mm Wide Low Profile Rubber Floor Cable Cover
Questions
Can vehicles drive over it?
Yes, it is a toughened profile designed to protect cables from crushing in areas with vehicle traffic.
How do the cables go in?
Through the split membrane in the base: open it and push the cables up into the channels, so there is no need to thread them from the end.
Can it be used outdoors?
Yes, the rubber is UV stable for outdoor use.
Is it safe in a fire?
It is halogen-free with low smoke and fume emission, and tested to BS 476 Part 7 Class 3.
Need help choosing? Contact our technical team with your panel thickness or application and we will point you to the right profile.
Product details
| SKU | IP-IHVCP-156X30-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hi-Vis Cable Protector 156mm x 30mm – 2 x 23mm Channels – 4.5m Length