
Rubber & FoamSKU IP-PVCET-10.5X15-14M
Light Grey PVC Self-Grip Edge Trim – 10.5mm x 15mm for 3–4mm Panels – 14m to 50m Lengths
Price shown updates with the option you pick.
This light grey PVC self-grip edge trim, 10.5mm wide x 15mm high, pushes onto 3mm to 4mm sheet-metal, plastic, glass and composite panel edges to cover sharp or cut edges and give a neat finish. A U-shaped steel carrier runs the full length inside a flexible PVC jacket, and two hooked gripping fins inside the slot hold it on without glue, so it can be taken off and refitted. Every option is one continuous length, from 14m up to a full 50m coil, held in stock for same-day dispatch.
At a glance
- 10.5mm wide x 15mm high, 13mm deep inside, 4mm mouth
- Fits 3mm to 4mm panel edges
- Steel carrier plus twin internal gripping fins – no adhesive
- Light grey PVC, 70 Shore A, suits grey and white enclosures
- Rated -10°C to +60°C
- One unbroken length, 14m to 49m in 1m steps, or a full 50m coil (best value per metre)
Technical drawing


Specifications
| Property | Value | Test method / source |
|---|---|---|
| Overall width | 10.5 mm | Supplier drawing, nominal |
| Overall height | 15 mm | Supplier drawing, nominal |
| Inside depth (slot) | 13 mm | Supplier drawing, nominal |
| Mouth opening (unflexed) | 4 mm | Supplier drawing, nominal |
| Panel thickness it fits | 3 mm to 4 mm | Supplier data sheet |
| Thickness (as stated by supplier) | 2.5 mm | Supplier data sheet |
| Material | Flexible PVC jacket over a U-shaped steel carrier | Supplier data sheet |
| Gripping fins | 2, hooked, one on each inner wall | Supplier drawing |
| Colour | Light grey | Supplier data sheet |
| Hardness | 70° Shore A | Shore A durometer (supplier figure) |
| Tensile strength | > 11 MPa | Supplier figure, method not stated |
| Elongation at break | > 260 % | Supplier figure, method not stated |
| Density | 1.35 to 1.45 g/cm³ | Supplier figure, method not stated |
| Minimum service temperature | -10 °C | Supplier figure |
| Maximum service temperature | +60 °C | Supplier figure |
| Tear strength | Not stated for this profile | – |
| Compression set | Not stated for this profile | – |
| Dimensional tolerance | Not stated; nominal sizes – ask us if your application is critical | – |
| Lengths available | 14 m to 49 m in 1 m steps, or 50 m full coil | Each length supplied as one piece |
| Price per metre | £12.28/m inc VAT on cut lengths; £9.44/m on the 50 m coil | – |
Materials and compliance
The trim is a flexible PVC compound extruded over a formed steel carrier strip. The PVC gives a smooth, wipe-clean light grey finish with good resistance to moisture and everyday weathering; the steel carrier gives the clamping force and lets the trim be bent round curves without springing back. Our supplier does not state any food-contact, WRAS, REACH, RoHS or fire-rating approval for this profile, so we make no compliance claims for it. If you need a certified or fire-rated edge trim, contact us and we will suggest one that carries the approval you need.
Typical uses
- Edging sheet-metal enclosures, control cabinets, racks and machine guards
- Finishing cut-outs and openings in 3mm to 4mm panels
- Safety edging on hatches, access panels and partition tops
- Trimming acrylic, polycarbonate, glass and composite panels
- Covering exposed edges on shelving, displays and furniture
Which trim do I need?
| Panel thickness / finish | Trim to choose |
|---|---|
| 3mm to 4mm, grey or white finish | This trim – light grey 10.5mm x 15mm |
| 3mm to 5mm, black finish | Black PVC self-grip edge trim 10.5mm x 14.5mm |
| 1mm to 3mm | PVC self-grip edge trim 9.5mm x 14mm |
| 8mm to 9.5mm | PVC self-grip edge trim 12mm x 15.5mm |
How much do I need?
Each option is a single continuous length, so pick the length that covers your whole run in one piece. Measure every edge and add about 2% for trimming the ends. Example: the door openings of four enclosures, each 1,200mm x 800mm, need 4 x 2 x (1.2 + 0.8) = 16m, plus 2% = 16.3m, so order 17m. From 39m upwards the 50m coil costs less than the cut length, so order the coil and keep the spare.
Fitting
- Check the edge is 3mm to 4mm thick, deburred, clean and dry.
- Start on a straight run and press the trim on by hand, working along the edge.
- Tap it fully home with a rubber or plastic mallet – never a steel hammer.
- Let it follow corners naturally rather than stretching it; on tight 90° corners cut a small V notch in the legs.
- Cut with side cutters or a fine-tooth hacksaw (there is steel inside) and butt the ends tightly.
Frequently asked questions
What panel thickness does it fit?
3mm to 4mm. The mouth is 4mm and the two fins fold down to grip both faces. On sheet thinner than 3mm it will not grip firmly; use the 9.5mm x 14mm trim instead.
Do I need glue or tape?
No. The steel carrier clamps the legs and the fins bite on the panel, so it holds by itself and can be removed and refitted.
How do I cut and join it?
Cut through the steel carrier with side cutters or a fine hacksaw. Butt the two ends tightly together; for a cleaner join on show edges, put the joint at a corner or out of sight.
Will it go round curves and corners?
Yes. It bends round curves and radiused corners by hand. For a sharp 90° corner, cut a small V notch out of the legs at the bend so the trim lies flat.
What temperature can it take?
-10°C to +60°C. It is fine for indoor and sheltered outdoor equipment, but not for hot areas such as oven doors or engine bays.
Is it supplied in one piece?
Yes. Every option from 14m to 50m is one continuous length with no joins.
What is it made of?
A flexible light grey PVC jacket, 70 Shore A, moulded over a U-shaped steel carrier.
Can I use it as a seal?
It is an edge protector and trim, not a seal. If you need to seal a door or lid as well, look at a self-grip trim with a sponge bulb.
Need help choosing? Contact our team or call +44 1282 277786 with your panel thickness and finish.
Product details
| SKU | IP-PVCET-10.5X15-14M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Light Grey PVC Self-Grip Edge Trim – 10.5mm x 15mm for 3–4mm Panels – 14m to 50m Lengths