Chrome Magnetic Shower Screen Seal - Fits 6-8mm Glass - 1 Pair - 2000mm

What this seal is

A chrome magnetic closing seal for shower doors with 6–8mm glass, supplied as a pair in 2000mm lengths. Each seal is a high-quality rigid PVC U-section that simply pushes onto the closing edge of the glass and grips comfortably — no additional adhesive needed. Inside each seal sits a plastic-covered magnetic strip: the two strips pull together to hold the door firmly shut while you shower, yet part easily when you open the door.

These seals are normally fitted vertically and are most often found on quadrant enclosures, though some bath screens and other doors use them too. They can be used at either 135° or 180°, as shown in the main product image, so they suit both angled and in-line closing edges.

Specification

Why fit this seal

Keeps the door closed and the water in. Tired or missing magnetic strips let the door drift open mid-shower, sending water onto the bathroom floor. A fresh pair snaps the door shut every time and protects flooring and skirting from water damage.

No adhesive, no mess. The rigid U-section grips 6–8mm glass on its own — it slides straight onto the closing edge and can be removed again without leaving residue on the glass.

A smart chrome finish. The chrome colour sits neatly alongside chrome-framed enclosures, so the replacement looks as good as it works.

Cut to fit at home. Each 2000mm length trims down easily for a perfect fit — or use our custom cutting service and the pair arrives ready to fit.

Fitting in three steps

1. Measure. Check your glass is 6–8mm thick, measure the height of each closing edge, and check the gap between the doors — up to 25mm for sliding doors, exactly 25mm for hinged or pivoting doors so the magnets line up.

2. Choose. The pair comes in 2000mm lengths — order as supplied and trim down, or add the custom cutting service.

3. Fit. Push a U-section onto each closing edge so the two magnetic strips face each other, then close the door to check the magnets meet squarely. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.