Shower Seals & Spares
White Magnetic Shower Seals - 11mm T, Spans 16mm - 1 Pair
Price shown updates with the option you pick.
What these seals are
A pair of white magnetic channel seals that hold your shower door closed and watertight. Each seal has an 11mm-wide T-piece that slides into the channel in your door frame — no adhesive needed — and a magnetic strip encased in white plastic to match the rest of your enclosure. The magnets pull the door shut when you shower, yet release easily when you push the door open.
These seals are fitted vertically, usually on quadrant enclosures, though some bath screens and other doors use them too. Used together as a pair they will span a maximum gap of 16mm; if pairing one with a different seal, check the full dimensions on the technical drawing in the gallery above.
Specification
| Colour | White — magnetic strip covered in white plastic to match your enclosure |
| T-piece width | 11mm — fits an 11mm-wide channel, and possibly some slightly narrower channels (measure the minimum width of your channel to check) |
| Maximum gap spanned | 16mm when the pair is used together |
| Sold as | 1 pair |
| Length | 2000mm — custom cutting service available |
| Material | Soft PVC — durable and flexible |
| Fitting | T-piece slides into the frame channel — no adhesive |
| Position | Vertical — usually on quadrant enclosures |
| Cutting down | Easily cut to size with a good-quality pair of scissors |
Why fit these seals
Holds the door properly shut. Tired magnets let a door drift open mid-shower and leak. A fresh magnetic pair snaps the door closed every time and keeps water inside the enclosure.
Easy to open, secure when closed. The magnetic strips grip firmly while you shower but release with a gentle push once you are finished.
Blends into white enclosures. With the magnet fully encased in white plastic, the seals match white frames instead of standing out against them.
Simple, mess-free replacement. The soft PVC T-piece slides into your existing channel with no adhesive, and cuts to length with scissors.
Fitting in three steps
1. Measure. Measure the minimum width of your frame channel (the T-piece is 11mm wide), the gap between the closing edges, and the height of the channel.
2. Choose. Order the 2000mm pair — trim at home with scissors, or add custom cutting and they arrive ready to fit.
3. Fit. Slide the old seals out of the channels and clean away any dirt or grime, then slide the new seals along the length of each channel with the magnetic faces meeting when the door closes.
Not sure they fit?
Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:White Magnetic Shower Seals - 11mm T, Spans 16mm - 1 Pair