White Magnetic Shower Seals - 7mm T, Spans 18mm - 1 Pair

What this seal is

A pair of white magnetic channel seals that hold your shower door closed and sealed while you shower. Each seal has a 7mm-wide T-shape that slides into the channel on the door frame, and a magnetic strip encased in white plastic to match the rest of your enclosure — the magnets pull the door shut, yet it still opens easily when you are finished.

These seals fit vertically, usually on quadrant enclosures, though some bath screens and other doors use them too. Used together as a pair they will span a maximum gap of 18mm; if pairing one with a different seal, check the full dimensions on the technical drawing in the gallery.

Specification

Why fit this seal

Holds the door shut. Tired magnets or perished strips let the door drift open mid-shower. A fresh magnetic pair snaps the door closed and keeps the water inside.

Blends in. The white plastic covering matches white enclosure frames, so the new seals look like they came with the door.

No-mess fitting. The T-shape slides along the existing channel — no adhesive, no tools, no drying time.

UK stock, fast dispatch. Held in stock in the UK and dispatched same working day when ordered before 2pm.

Fitting in three steps

1. Measure. Check the minimum width of your channel — the 7mm T-shape needs a 7mm channel, though a slightly narrower one may work. Check the closing gap is no more than 18mm.

2. Choose. The pair comes in 2000mm lengths — order as supplied and trim down, or use our custom cutting service.

3. Fit. Remove the old seals, clean any dirt or grime out of the channels, then slide each new seal along the length of its channel so the magnetic faces meet when the door closes.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.