Magnetic Shower Seals - 8-10mm Glass, 90 Degree - 1 Pair

What this seal is

A pair of magnetic closing seals for shower doors with 8–10mm glass. Each rigid PVC U section pushes onto the edge of the glass and grips on its own — no adhesive needed — and the built-in magnetic strips pull the door closed against the fixed panel, holding it shut while you shower yet opening easily when you're finished.

The magnets are covered in white plastic to blend in with the rest of your enclosure, and the pair fits vertically on the closing edges of the door and adjacent panel.

Specification

Why fit this seal

Keeps the door shut while you shower. The magnetic strips pull the door firmly against the fixed panel, closing the gap along the full height of the enclosure and stopping water escaping at the opening edge.

No adhesive, no mess. The channels are designed to comfortably grip 8–10mm glass on their own — they slide straight on and can be removed without leaving residue.

Easy replacement for tired magnets. If your old magnetic seals are discoloured or have lost their pull, this pair swaps straight on in minutes and makes the whole enclosure feel new again.

Cut to fit at home. The 2000mm lengths trim down to the exact height of your door, or use our custom cutting service and they arrive ready to fit.

Fitting in three steps

1. Measure. Check your glass is 8–10mm thick and measure the height of the closing edges on the door and fixed panel.

2. Choose. Trim the 2000mm lengths down to your measurement at home, or have us cut them for you.

3. Fit. Push one seal onto the closing edge of the door and the other onto the fixed panel so the magnetic faces meet. Close the door to check the magnets pull together along the full height.

Not sure it fits?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.