Magnetic Shower Seals - 8-10mm Glass, 135 Degree - 1 Pair

What this seal is

A pair of clear magnetic shower screen seals for 8–10mm glass. Each rigid PVC U-section pushes onto the edge of the glass with no additional adhesive, and the built-in magnetic strips — covered in white plastic to match your enclosure — pull the door closed and hold it shut while you shower, yet still open with an easy pull.

Fitted to the closing edges of the door, the pair gives a frameless enclosure a positive, watertight close without hinges, catches or drilling.

Specification

Why fit this seal

A door that closes itself. The magnetic strips snap the door shut and hold it sealed while you shower — no more nudging the door closed behind you.

Stops leaks at the closing edge. The meeting magnets close the gap where water most easily escapes, protecting your bathroom floor.

No adhesive, no mess. Each U-section grips 8–10mm glass on its own and can be removed without leaving residue.

Trim to fit at home. The 2000mm pair cuts down easily to your exact door height, or use the custom cut option.

Fitting in three steps

1. Measure. Check your glass is 8–10mm thick and measure the height of the closing edges of your door.

2. Choose. Order the 2000mm pair, adding the custom cut option if you would like it to arrive ready to fit.

3. Fit. Trim to height if needed, then push a seal onto each closing edge so the magnetic strips face each other and meet when the door closes. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seals or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.