
Rubber & FoamSKU IP-NRS-25X1.6
Natural Rubber Strip – 25mm x 1.6mm – 5m Coil
This natural rubber strip 25mm x 1.6mm is solid black, 25mm wide and 1.6mm thick, and sold as one 5m coil. It is a flexible, hard-wearing general purpose strip for gaskets, packing, anti-chafe pads and wear strips in workshops, fabrication and maintenance.
At a glance
- Black solid natural rubber flat strip, 25mm wide x 1.6mm thick
- Sold per 5m coil – cut to length with a sharp knife
- 70° Shore A hardness: flexible but hard-wearing
- Good abrasion and tear resistance for anti-chafe and wear strip use
- Resists water, alcohols, ketones and organic acids
- Working temperature -20°C to +80°C
Typical uses
- Flat rubber gaskets and packing between metal parts and panels
- Anti-chafe and anti-rattle strips between moving or vibrating parts
- Rubber wear strips and edge protection on frames and benches
- Light-duty door, hatch and window draught sealing indoors
Which one do I need?
This 25mm strip is a narrow strip for edges, small gaskets and anti-chafe pads; its thin 1.6mm section bends easily and fits narrow gaps. Compare the natural rubber strip range:
| Size | Best for |
|---|---|
| 63mm x 3.2mm | firm pads, wear strips |
| 51mm x 3.2mm | firm pads, wear strips |
| 38mm x 3.2mm | firm pads, wear strips |
| 51mm x 2.4mm | gaskets, packing, anti-chafe |
| 38mm x 2.4mm | gaskets, packing, anti-chafe |
| 25mm x 2.4mm | gaskets, packing, anti-chafe |
| 51mm x 1.6mm | thin shims, liners |
| 38mm x 1.6mm | thin shims, liners |
| 25mm x 1.6mm (this product) | thin shims, liners |
Technical drawing
Specification
| Material | Solid natural rubber |
| Colour | Black |
| Width | 25mm |
| Thickness | 1.6mm |
| Unit of sale | One 5m coil |
| Hardness | 70° Shore A |
| Tensile strength | 2.94 MPa |
| Elongation at break | 200% |
| Tear strength | 1.57 N/mm |
| Working temperature | -20°C to +80°C |
| Chemical resistance | Water, alcohols, ketones, organic acids |
How much do I need?
Each coil gives 5 metres of 25mm x 1.6mm strip. Add up the lengths you need, allow about 5% for trimming, then divide by 5 and round up. Example: lining two benches 2.2m long and one 3m frame needs 7.4m; with 5% extra that is about 7.8m, so order 2 coils (10m).
Fitting tips
- Clean and degrease the mating surface before bonding; use a rubber contact adhesive for a permanent fix.
- Cut with a sharp knife against a steel rule for a square, clean end.
- Lay the strip flat and unstressed; do not stretch it into place or it will pull back.
- Keep natural rubber away from oils, fuels and long periods of direct sun – choose EPDM or nitrile for those jobs.
Complete your project
- Natural rubber strip 25mm x 2.4mm – 5m coil
- Natural rubber strip 51mm x 1.6mm – 5m coil
- 1mm thick solid SBR rubber strip
Questions
Is the price for the full 5m?
Yes. The price is for one 5m coil of 25mm x 1.6mm natural rubber strip. Order more coils for longer runs.
Can I use this rubber strip as a gasket?
Yes. Cut it to length and fit it between flat faces as a simple gasket or packing strip for water and general indoor sealing. It is not suitable for oil or fuel.
Is natural rubber strip suitable for outdoor use?
Natural rubber is best indoors or in sheltered areas. Long exposure to sunlight and ozone ages it, so EPDM is the better choice outside.
How do I cut this 1.6mm strip?
A sharp utility knife or heavy shears cut it cleanly. Use a straight edge for square ends.
Need help choosing a strip? Contact our team for technical advice.
Product details
| SKU | IP-NRS-25X1.6 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Natural Rubber Strip – 25mm x 1.6mm – 5m Coil