
Rubber & FoamSKU IP-PEXT-32X11-STD
Neoprene P Extrusion – 32mm x 11mm – Per Metre
This neoprene P extrusion 32mm x 11mm combines a hollow 11mm sealing bead with a flat 21mm tail, so it fixes flat to a frame and seals against a closing door, hatch or panel. It is sold per metre, with a minimum order of 5 metres and continuous lengths up to a 30m coil.
At a glance
- 32mm overall width: 11mm hollow bead plus 21mm flat tail
- Hollow bead compresses easily to close uneven gaps
- Flat 3mm tail for adhesive, rivet or screw fixing
- Solid black neoprene (CR) rubber seal, 65° to 75° Shore A
- Good weathering resistance and better oil resistance than EPDM
- Working range -20°C to +90°C
Typical uses
- Door and window weather seals on cabinets and enclosures
- Marine hatch and locker lid seals
- Panel dividers and cushion seals in vehicle bodies
- Edge protection and impact cushioning on industrial equipment
- Draught and dust seals on access panels
Which one do I need?
| P extrusion | Choose it when |
| EPDM 27.7mm x 12.7mm | A similar gap, but outdoor UV and ozone resistance matter more than oil resistance |
| Neoprene 32mm x 11mm (this seal) | Medium gaps where some oil or fuel splash is expected |
| EPDM 32.5mm x 18mm | Larger gaps that need a taller bead |
| Neoprene 41mm x 15mm | Wider fixing faces and bigger gaps in neoprene |
Technical drawing
Specification
| Material | Solid neoprene (CR) |
| Colour | Black |
| Overall width | 32mm |
| Bead | 11mm diameter, hollow |
| Tail | 21mm wide, 3mm thick |
| Hardness | 65° to 75° Shore A |
| Tensile strength | 5 MPa |
| Elongation at break | 400% |
| Temperature range | -20°C to +90°C |
| Weight | 0.17kg per metre |
| Unit of sale | Per metre, minimum 5m, up to 30m continuous |
How much do I need?
Measure the perimeter of the opening and round up to the next whole metre. A locker lid 600mm x 400mm needs 2m, so order the 5m minimum. Two doors each 1.8m x 0.9m need 2 x 5.4m = 10.8m, so order 11 metres; it arrives as one continuous length up to 30m.
Fitting tips
- Clean and degrease the frame before fitting.
- Fix through the flat tail with rivets or screws, or bond it with a contact or polyurethane adhesive.
- Place the bead where the door or lid lands on it, so it compresses rather than being dragged.
- Lay the seal in without stretching it, so it does not shrink back at joints.
Complete your project
- Neoprene P Extrusion – 41mm x 15mm
- EPDM P Extrusion – 32.5mm x 18mm
- EPDM P Extrusion – 27.7mm x 12.7mm
Questions
Can this neoprene P seal be used outdoors?
Yes. Neoprene handles weathering well, so it suits external doors, hatches and enclosures.
Neoprene or EPDM?
Choose neoprene where oil or fuel splash is likely; choose an EPDM P extrusion for the best long-term UV and ozone resistance.
How do I fix the tail?
The 21mm flat tail takes rivets or screws, or can be bonded with a contact or polyurethane adhesive.
How do I cut it?
Sharp heavy-duty scissors or a utility knife cut the 3mm neoprene cleanly.
How is it supplied?
Cut to your length from a 30m coil, as one continuous piece for orders up to 30m.
Need help choosing the right rubber seal? Contact our team.
Product details
| SKU | IP-PEXT-32X11-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene P Extrusion – 32mm x 11mm – Per Metre