
Rubber & FoamSKU IP-EPDMP-32.5X18-4
EPDM P Extrusion – 32.5mm x 18mm – Cut to Length
Price shown updates with the option you pick.
This solid EPDM P extrusion features a 32.5mm flange and an 18mm diameter hollow bead, providing excellent compression to form a reliable, weather-resistant seal. It is widely used in automotive, transportation, and marine applications to seal doors and windows, or as a protective trim to absorb impacts. The product is supplied cut to your chosen length, from 4m up to a full 30m coil.
At a glance
- Solid EPDM rubber construction
- 18mm diameter hollow sealing bead
- 32.5mm overall flange length
- Excellent UV and weathering resistance
- Suitable for interior and exterior use
- Supplied cut to length (4m to 30m)
Typical uses
- Door and window weather seals
- Automotive and transportation sealing
- Marine hatches and enclosures
- Industrial and commercial waterproofing
- Impact-absorbing decorative trim
Which one do I need?
| Profile | Best for |
| EPDM P 27.7mm x 12.7mm | Smaller gaps on cabinet and enclosure doors |
| EPDM P 31.67mm x 12.5mm | Medium door gaps where a slimmer bulb is enough |
| EPDM P 32.5mm x 18mm (this item) | Larger or uneven gaps on hatches, vehicle doors and marine enclosures that need a deep, soft bead |
Technical drawing
Specification
| Material | Solid EPDM (Ethylene Propylene Diene Monomer) |
| Flange length | 32.5mm |
| Bead diameter | 18mm (hollow) |
| Thickness | 3mm |
| Hardness | 65° to 75° Shore A |
| Operating temperature | -40°C to +90°C |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Compression set | 21% (70°C for 22 hours) |
| Weight | 0.25kg per metre |
| Unit of sale | Per length (4m to 30m) |
How much do I need?
This extrusion is sold in pre-cut lengths from 4m to 30m. If you need to seal a marine hatch measuring 1.5m by 1m, the total perimeter is 5m. You would select a 5m length to complete the job with a single continuous piece.
Fitting tips
- Ensure the mounting surface is clean, dry, and free of grease before application.
- The profile can be secured using a suitable rubber adhesive or mechanical fixings through the flange.
- Avoid stretching the rubber during installation to prevent it shrinking back over time.
- Cut the extrusion slightly longer than required to ensure a tight butt joint at the ends.
Complete your project
- EPDM P Extrusion – 27.7mm x 12.7mm – Cut Length
- EPDM P Profile Seal – 31.67mm Tail x 12.5mm Bulb – Per Metre
- Neoprene P Extrusion – 32mm x 11mm – Per Metre
Questions
Can this be used outdoors?
Yes, EPDM offers excellent resistance to UV and weathering, making it ideal for both interior and exterior applications.
How do I fix this seal in place?
It can be installed using a compatible adhesive or by mechanically fixing the flat flange to your surface.
Is the bead solid or hollow?
The 18mm bead is hollow, which allows for superior compression when forming a seal.
What is the maximum continuous length available?
The maximum full coil length is 30m.
Which is better for a hatch, the 18mm or the 12.7mm bead?
The 18mm bead closes larger and less even gaps; choose the 27.7mm x 12.7mm profile where the gap is small and the closing force must stay low.
If you need further assistance, please contact our team.
Product details
| SKU | IP-EPDMP-32.5X18-4 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM P Extrusion – 32.5mm x 18mm – Cut to Length