
Rubber & FoamSKU IP-NBRC-1
Nitrile Rubber Cord – Solid NBR 70 Shore A, 1mm to 30mm Diameter – Per Metre
Price shown updates with the option you pick.
Nitrile rubber cord (NBR) in 32 diameters from 1mm to 30mm, a solid black 70° Shore A cord for oil- and fuel-resistant seals, gaskets and spliced O-rings. Sold per metre: choose your diameter and enter the number of metres as the quantity (minimum 10 m for 1–6.5mm, 5 m for 7mm and above).
At a glance
- Solid nitrile (NBR) rubber cord, black, no hollow core
- 32 diameters: 1mm to 30mm, including the common O-ring sections 2.62, 3.53 and 5.33mm
- 70° Shore A – firm enough to hold its shape in a groove, flexible enough to splice into rings
- Excellent resistance to petroleum, mineral and vegetable oils, hydrocarbons and most dilute acids and alkalis
- Working range -20°C to +80°C
- Sold per metre; minimum order 10 m (up to 6.5mm) or 5 m (7mm+)
Typical uses
- Oil-resistant sealing cord for machined grooves in pumps, gearboxes and hydraulic covers
- Cut-and-splice O-rings and large-diameter gaskets where moulded rings are not available
- Dust and splash seals on machinery guards and enclosures
- Automotive, aerospace and defence sealing where fuels or oils are present
- Rubber packing strip and decorative trim
Which one do I need?
| Diameter | Typical job | Minimum order |
|---|---|---|
| 1mm – 2.62mm | Small covers, sensor housings, fine grooves; 1.6, 2.4 and 2.62mm suit common O-ring sections | 10 m |
| 3mm – 6.5mm | General pump, valve and flange grooves (3.53 and 5.33mm match standard O-ring sections) | 10 m |
| 7mm – 12mm | Inspection doors, large covers, tank lids | 5 m |
| 13mm – 30mm | Heavy packing, large-section gaskets and bumpers | 5 m |
Need higher temperature or aggressive-fluid resistance? Our FKM solid rubber cord covers 1mm to 14mm.
Technical drawing
Specification
| Material | Nitrile butadiene rubber (NBR), solid |
| Diameters | 1, 1.5, 1.6, 2, 2.4, 2.5, 2.62, 3, 3.53, 4, 4.5, 5, 5.33, 5.7, 6, 6.35, 6.5, 7, 8, 8.4, 9, 9.5, 10, 11, 12, 13, 14, 15, 16, 20, 25, 30mm |
| Hardness | 70° Shore A |
| Colour | Black |
| Temperature range | -20°C to +80°C |
| Tensile strength | 12 MPa |
| Elongation at break | 300% |
| Compression set | 25% (22 hours at 100°C) |
| Unit of sale | Per metre (minimum 10 m up to 6.5mm, 5 m from 7mm) |
How much do I need?
For an O-ring, measure the groove's centreline circumference: π × (groove inside diameter + cord diameter). Example: a 200mm bore groove with 5.33mm cord needs π × 205.33 ≈ 645mm per ring, so ten rings need about 6.5 m – order the 10 m minimum. For a straight seal, add the side lengths plus 20mm per joint for trimming.
Fitting tips
- Cut with a sharp blade in one stroke, square to the cord, so spliced joints meet flat.
- Bond joints with a cyanoacrylate rubber adhesive; hold for a few seconds and let it cure before stretching the ring.
- Make the ring 1–3% smaller than the groove circumference so it sits under slight stretch and stays put during assembly.
- Choose a cord that fills roughly 75–85% of the groove depth so it compresses rather than extrudes.
- Clean oil and swarf from grooves first – the rubber resists oil, but trapped debris causes leaks.
Complete your project
- FKM Fluoroelastomer Solid Rubber Cord – 75° Shore A – Per Metre
- Translucent Silicone Solid Rubber Cord – 40° Shore A – 10m Coil
- Neoprene Sponge Cord – 6mm Diameter – Per Metre
Questions
Is nitrile rubber cord suitable for fuel and oil?
Yes. Nitrile is chosen for its resistance to petroleum, mineral and vegetable oils and hydrocarbons. For temperatures above 80°C choose FKM cord instead.
Can I make my own O-rings from this cord?
Yes. Cut the cord square, bond the ends with a cyanoacrylate rubber adhesive and fit the ring with slight stretch in the groove.
How do I order 10 metres?
Select your diameter and enter 10 in the quantity box – the price shown is per metre. Diameters from 7mm can be ordered from 5 m.
Is the cord solid or hollow?
Solid all the way through. For a softer, compressible seal see our sponge cords.
Is this the same as Buna-N or NBR?
Yes – nitrile, NBR and Buna-N are names for the same oil-resistant rubber family.
Not sure which diameter suits your groove? Contact our team with the groove size and we will help.
Product details
| SKU | IP-NBRC-1 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Nitrile Rubber Cord – Solid NBR 70 Shore A, 1mm to 30mm Diameter – Per Metre