
Rubber & FoamSKU IP-NBRS-50X55-STD
Nitrile Solid Rubber Seal – 50mm x 55mm – 5m Roll
This nitrile solid rubber seal measures 50mm wide by 55mm high and is sold as one 5m length. Made from solid NBR rubber, it gives a tough, watertight and airtight seal where oils, fuels and grease are present, on marine and industrial hatches, doors and buffers.
At a glance
- Nitrile rubber seal, solid 50mm x 55mm section
- Supplied as one 5m length
- Resists mineral oils, diesel, fuels and grease
- 70 Shore A hardness for impact and wear
- Watertight and airtight when compressed
- Cuts cleanly to length with a fine-toothed saw
Typical uses
- Heavy hatch and access panel seals in engine rooms
- Oil-resistant door seals in workshops and plant rooms
- Impact buffers and bump stops on machinery
- Anti-vibration pads under equipment
- Fuel and chemical plant access covers
Which one do I need?
| Profile | Section | Best for |
|---|---|---|
| Nitrile solid seal 50mm x 55mm (this item) | Taller than wide | Deeper gaps and buffers where 55mm of height is needed |
| Nitrile solid seal 55mm x 55mm | Square | Wider seating faces and square rebates |
Technical drawing
Specification
| Material | Nitrile rubber (NBR) |
| Section | 50mm wide x 55mm high, solid |
| Hardness | 70 Shore A |
| Colour | Black |
| Unit of sale | One 5m length |
How much do I need?
Measure the full perimeter or run to be sealed and add about 50mm for trimming. A 1.2m x 0.8m hatch has a perimeter of 4.0m, so one 5m length covers it with spare. For two hatches of that size order two lengths.
Fitting tips
- Degrease the seating face first so the adhesive bonds fully.
- Lay the length out flat for a few hours before cutting so it relaxes.
- Mitre corners at 45 degrees for neat, tight joints.
- Check hinges and latches can take the closing force a solid seal needs.
Complete your project
- Nitrile Solid Rubber Seal – 55mm x 55mm – 5m Roll
- Hollow PVC DD Fender – 100mm x 55mm
- TPE U Channel – 22mm x 52mm for 10mm Panels
Questions
Is this nitrile seal compressible?
It is solid 70 Shore A rubber, so it compresses only slightly. Choose it for strength, impact and oil resistance rather than a soft, low-force seal.
Will diesel or hydraulic oil damage it?
No. Nitrile is chosen for its resistance to mineral oils, fuels and grease, which swell and weaken many other rubbers.
Can it be used outdoors?
Yes, on marine and industrial equipment. For long sunlit runs with no oil present, EPDM gives better weathering.
How do I cut the 50mm x 55mm section?
Use a fine-toothed saw or a sharp heavy-duty knife with a straight edge, wetting the blade for a clean square cut.
Need help choosing a seal? Contact our team for advice.
Product details
| SKU | IP-NBRS-50X55-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Nitrile Solid Rubber Seal – 50mm x 55mm – 5m Roll